Operation Manual

7
BA 105 A1
GB
IE
Initial operation
Inserting/replacing the batteries
Motion detector:
♦ Open the battery compartment on the rear of the device by pushing
the cover in the direction of the arrow.
♦ Insert 4 batteries of type AA in the battery compartment (observe the
correct polarity!). The siren will make a brief signal sound.
♦ Close the battery compartment again.
Remote control:
NOTE
►
The batteries supplied (Type LR44) are already inserted in the remote
control when delivered. Before use, remove the insulating strip on the rear
of the remote control.
To insert new batteries proceed as follows:
♦ Undo the screws on the rear of the remote control and open the housing.
♦ Place the 3 batteries of type LR44 in the battery compartment
(observe the correct polarity!).
♦ Screw the remote control back together.
IB_101135_BA105A1_LB3.indb 7IB_101135_BA105A1_LB3.indb 7 23.06.14 14:0523.06.14 14:05