GB Operating Instructions eBench Hi-Fi Door Bell KH Operating Instructions|
GB Operating Elements for the Hi-Fi Door Bell Table of Contents . . . . . . . Operating Elements for the Hi-Fi Door Bell.................................... . Technical Data....................................................................................... . Declaration of Conformity ............................................................... . Use ............................................................................................................ .
. Technical Data . Declaration of Conformity • We, Kompernaß Handelsgesellschaft mbH, Burgstr. , D- Bochum, Germany, hereby declare that this product confirms to the following standards: • • • • • • Power supply AC: / volts ( A) or x .
GB . Use The eBench Hi-Fi Door Bell KH is exclusively intended for use as a door bell in connection with an existing door bell/bell system in private households and in sealed rooms. . Description of Functions The eBench Hi-Fi Door Bell KH offers you different melodies and sound effects as bell tones: . Radetzky March . Ode to Joy . Howling wolf . Aida . Chinese cymbal . Bolero . Techno . March of the Toreros . Breaking glass . Jingle Bells . Crowing rooster . Bongo .
. Installation of the Hi-Fi Door Bell Safety Instructions Warning! Risk of electric shock! Only a qualified electrician is permitted to install, i.e.
. Commissioning GB You can start up the Hi-Fi Door Bell once it has been installed correctly. To do this … Remove the Hi-Fi Door Bell from its wall holder and place it on its front. Use a Philips-head screwdriver to release the screw on the battery compartment and remove the lid. Insert 4 batteries of the type 1.5 V C (Baby/R 114 P/UM2) into the battery compartment; make sure that the batteries are facing the right way.
. Selecting a Bell Tone GB You can select a bell tone for the front door, the back door and also any side entrance, etc. This enables you to distinguish immediately where the bell is ringing. Alternatively, instead of selecting a specific bell tone, you can also set the Hi-Fi Door Bell in such a way that one of the preprogrammed pieces of music or sound effects is chosen randomly and is played each time the bell is pressed.
GB . Bell Tone for the Front Door In order to select one of the pre-programmed pieces of music or sound effects as bell tone for the front door … Press the button “M” until “E”appears in the display. Press the buttons < and > to select one of the pieces of music or sound effects listed under numbers 1 to 18. The display shows the number of the pieces of music and sound effects.
. Bell Tone for the Back Door In order to select one of the pre-programmed pieces of music or sound effects as bell tone for the front door … Press the button “M” until “F” appears in the display. Repeat the steps 2 and 3 under 7.1 “Bell Tone for the Front Door“.
GB . Random Bell tones for the Front Door In order to activate the random mode for the front door bell … Press the button “M” until “E” for the front door bell tone appears in the display. | Operating Instructions Use the buttons < and > to select the piece of music with the number 00.
. Random Bell Tones for the Back Door In order to activate the random mode for the back door bell … Press the button “M” until “F” appears in the display. Use the buttons < and > to select the piece of music with the number 00.
GB . Setting the Volume In order to set the volume in which the selected bell tones are played … Press the button “M” until “U” appears in the display. Use the buttons < and > to set the volume between U0 (very quiet) to U9 (very loud). | Operating Instructions The display lists the currently set volume.
. Muting the Hi-Fi Door Bell GB Press the “Mute” button in order to mute the Hi-Fi Door Bell, thus meaning that no bell tone will sound if any of the connected bells are pressed. When the mute is active, the display lamp for the operating state on the front side of the Hi-Fi Door Bell flashes red.
GB . Loading Music on the Hi-Fi Door Bell You can load up to three additional melodies, sound effects and texts on the Hi-Fi Door Bell in addition to these pre-programmed melodies and sound effects. Information: If you are not sure which operating system is installed on your computer: Start your computer.
Information: GB If you are not sure whether the music title, sound effect or text you would like is stored on your computer in “Wave” format … Right click on the file you want. Click on “Attributes”. Click on the registration card “General”. The item “file type” will list the file format. The specified file type must be “WAV Audio” if you wish to load the file on the Hi-Fi Door Bell.
GB . Installing the Download Programme The installation programme dialogue window opens. In order to load sound files from your computer to the Hi-Fi Door Bell, you must install the download programme enclosed with the Hi-Fi Door Bell on your computer. To do this … Follow the instructions in the installation programme dialogue window. Place the CD ROM enclosed with the Hi-Fi Door Bell and entitled “Software Installation“ into the CD ROM drive on your computer.
. Downloading Music GB Once you have finished installing the download programme, you must now connect your computer to the Hi-Fi Door Bell using the enclosed download cable. To do this … Run down your computer. If your computer does not switch off automatically after being run down, do so manually as soon as your computer displays the message “You can now switch off your computer”. Pull the mains plug on your computer.
GB All you have to do is select later on in the download programme dialogue window whether you have connected the download cable to serial interface or . Connect the 3.5 mm audio jack connector on the other end of the download cable to the audio input on the Hi-Fi Door Bell. Replace the mains plug on your computer to the mains socket. Switch your computer back on. Select the “PC” mode on the Hi-Fi Door Bell by pressing the button “M” until “PC” appears in the Hi-Fi Door Bell’s display.
. Operating the Download Programme GB You enter data in the dialogue window in order to operate the download programme for your Hi-Fi Door Bell: First of all, use your mouse to select the title number under which you wish to store your piece of music on the Hi-Fi Door Bell. You have at your disposal: • • • Title number Title number Title number You can store 8 seconds of music, sounds or text on the title memory slots 16 and 17 respectively.
Select the serial interface you have connected the download cable to by clicking on “COM PORT ” or “COM PORT ” in the drop down menu under the item “Serial Interface”. GB If you are not sure which serial interface you have connected the download cable to, just proceed. You can change the setting at any time at the click of the mouse. Now select the file you wish to load on the Hi-Fi Door Bell.
Double click on the file you want. GB Click on the button “Download”. This file will then be downloaded from your computer on to the Hi-Fi Door Bell. The bar in the lower area of the dialogue window indicates the download progress. The message “Download Title No. [16/17/18] Complete” appears as soon as the download process is finished. Information: If the WAVE file is too large for the title memory slots and , i.e. the length of the desired music title, sound effect or text exceeds seconds ...
GB . Downloading Overwritten Titles You are now in the main menu. Click on “Original Title”. If you have loaded one of your own pieces of music, sound effects or texts on to the title memory slots 16 to 18, you will have overwritten the sound files that were originally installed there. If you wish to reload these overwritten music titles or sound effects on to the Hi-Fi Door Bell ... Click on the original piece of music/sound effect installed that you wish to reload onto the HiFi doorbell.
. Display Lamp for Operating Stand • Bell pressed while muted and batteries spent The display lamp beneath the display on the front side of the Hi-Fi Door Bell indicates … The display lamp flashes orange/red if one of the bells connected to the Hi-Fi Door Bell is pressed while the batteries are spent and the system is muted. In this case, replace all four batteries with new ones. • Mute The display lamp flashes red if the mute button on the Hi-Fi Door Bell has been activated.
GB . Deinstalling the Download Programme Place the CD ROM enclosed with the Hi-Fi Door Bell and entitled “Software Installation” in to the CD ROM drive of your computer. The start window opens automatically after a few seconds. Now proceed with step 5. If the start window does not open automatically, the automatic function on your computer is deactivated. In this case ... Double click the “My Computer” icon on the Desktop.
. Troubleshooting • If you receive the error report “Communication not possible”, this may be due to the following: The download cable may not be connected to the specified serial interface. Select the right interface in the download programme dialogue window: If you have selected interface number 1 (COM PORT 1) under the item “Serial Interface” in the dialogue window, now switch to interface 2 (COM PORT 2).
GB Double click the “My Computer” icon on the Desktop. If you cannot find a “My Computer” icon, click on “Start” on the bottom left edge of your screen and then click on “My Desktop” in the Start menu. Double click on the symbol for the CD ROM drive in which your placed the CD ROM. The start window opens automatically after a few seconds. Click on a flag to select a language. You are now in the main menu. Click on “Install Software”. The installation programme dialogue window opens.
. Handling Spent Batteries . Cleaning Do not dispose of spent batteries with your domestic waste. Please return the spent batteries to the special collecting points or to the shop in which you purchased them. Clean the Hi-Fi Door Bell using a clean, dry cloth only. You can use a brush to clean the gaps between the loudspeaker ribs on the front side of the Hi-Fi Door Bell.
GB . Safety Instructions . Assembly and Wiring Plan Attention! Attention! Never open the housing of the Hi-Fi Door Bell! The Hi-Fi Door Bell do not contain any components that users can service.
Warning! Assembly Plan GB Warning! Risk of electric shock! Never expose the Hi-Fi Door Bell to moisture! The Hi-Fi Door Bell must only be installed in sealed rooms, which are under no circumstances exposed to moisture! Exposure to moisture may cause an electric shock! Attention! Moisture may permanently and irreparably damage the device! No liability will be accepted for damage resulting from an exposure to moisture! Operating Instructions|
GB Wiring Plan X: S: S: (S): (S): A: A: T: L: N: | Operating Instructions Junction plate Front door bell Backdoor bell Front door bell with potential Back door bell with potential Parallel connection (for additional set of chimes) Parallel connection (for additional set of chimes) Isolating bell transformer Current Phase Neutral wire
12 mm 15 mm Drill template 105 mm 8 mm 81 mm 52 mm Operating Instructions| GB