User Guide

- 10 -

Whilst holding the button
ALARM  pressed down:
2. Press several times con-
secutively, or press and
hold, the button HOUR
, to set the hours.
3. Release the button
HOUR , as soon as the
desired hours setting is
shown in the Display  .
4. Press several times conse-
cutively, or press and
hold, the button MIN ,
to set the minutes.
5. Release the button MIN
, as soon as the desired
minutes setting is shown
in the Display  .
The adjusted alarm time
will be automatically accep-
ted as soon as the button
ALARM  is released.
6. To activate the alarm
time function, place the
switch  ALARM On/Off
to „ON”.
Snooze Function
Activating the switch
SNOOZE  interrupts the
alarm tone for 8 minutes.
After these 8 minutes, the
alarm tone is repeated.
Place the switch  ALARM
On/Off to „OFF“ to comple-
tely switch off the alarm
function.
Projection
Important! When used pro-
perly, radiation from the
projection display does not
present a danger!. However,
avoid looking directly into
the light beam and do not
point the beam directly at
other persons or at animals.
KH2201_02_IB_UK.qxd 14.11.2006 9:13 Uhr Seite 10