Operating Instructions eBench KH Portable CD Player/Radio GB Operating Instructions| Manual_KH2241_EN 1 16.09.
Contents GB . Technical Data.......................................................................................................................................................................... Radio ............................................................................................................................................................................................................................................. CD Player ....................................................
.. Repeat functions.............................................................................................................................................................................................................. ... Repeat track .................................................................................................................................................................................................................... ... Repeat CD...............................
. Technical Data Mains voltage: Output AC/alternating current: 220 V ~ 50 Hz DC/direct current : 12 V 1.5 V x 8 type C/LR14/UM2 : 2 x 1.2 watt (RMS) 30 watt (PMPO) Radio Reception range VHF/FM Reception range Medium-wave/AM 88 MHz to 108 MHz 540 kHz to 1610 kHz CD Player Laser Frequency response 3-beam laser 100 Hz to 16 kHz GB | Operating Instructions Manual_KH2241_EN 4 16.09.
. Use . Function The portable eBench KH 2241 CD Player/Radio is exclusively intended for … With the portable eBench KH 2241 CD Player/Radio you can … • • • • an entertainment electronics system the reception of radio stations playback of audio CDs private, non-commercial use • • Playback audio CDs Receive VHF and medium-wave radio stations Warning! We do not accept any liability/warranty for damage incurred as a result of incorrect use! GB Operating Instructions| Manual_KH2241_EN 5 16.09.
GB | Operating Instructions Manual_KH2241_EN 6 16.09.
. Controls and displays .. General .. Displays 8. Frequency-range selector for radio 7. LCD display for CD player 4. Volume control 17. Function selector .. Miscellaneous .. CD 5. Loudspeakers 3. Headphones connection (3.5 mm diam.) 2. Power cable connection for alternating current 6. Battery compartment 1. Carrying handle 15. CD compartment 9. Play/Pause button 10. Stop button 11. Next button 12. Back button 13. Repeat1/All button 14. Programme button .. Radio 18.
. Point of installation and safety instructions Set up your new portable eBench KH 2241 CD Player/Radio on a level, smooth non-slip base.
• Exposure to moisture • Water entering the set • Overheating Place the set upside down on a soft base that cannot damage the case. Open the battery compartment on the underside of the set. . Getting started Prior to first time use .. Connecting to the power supply Remove any cardboard or plastic transport protection from the battery compartment. The eBench KH 2241 CD portable Player/Radio can be operated • • with batteries or with the supplied mains cable plugged into a power socket. ...
• Radio station reception suddenly ceases. Always exchange all 8 batteries together to ensure full power once again. Please note: Spent batteries must not be disposed of in the domestic waste. Hand in spent batteries at collecting or waste-disposal points or return them to the place where they were purchased. If you eventually dispose of the portable CD Player/Radio yourself, then ensure that the batteries are removed beforehand! ...
Turn the tuning control on the front of the set to tune in a radio station with good reception characteristics. The currently tuned frequency is indicated on the frequency range scale on the front of the set. Turn the volume control on top of the set to adjust the required volume. .. Enhancing the reception of radio stations The set is fitted with built-in antennas to receive radio stations in the frequency ranges FM/VHF and AM/Medium Wave.
The display will indicate … • • The track number of the music title that is currently being played, for instance “1” for the first track on the CD, and “PLAY” to the left of the current track number. Turn the volume control on the top of the set to adjust the desired volume. .. CD playback pause (PAUSE mode) To stop playback of the audio CD press the “Play/Pause” button once. “PLAY”, displayed to the left of the current track number, will start to flash.
Continue pressing the “Next”/”Back” button until the display indicates the number of the desired track. Playback of the selected track commences instantly without having to press the “Play/Pause” button. section within the track is reached. Playback from the selected point of the track is now automatically continued at normal speed. ..
... Repeat CD In the event that a CD is currently being played, then stop playback by pressing the “STOP” button. To repeat all tracks on the audio CD press the “Repeat 1/All” button twice during playback of a music title. Activation of CD repeat is indicated by “RPT” appearing on the LCD display to the left of the current track number. Press the “Program” button once … • • The entire audio CD continues to be repeated until CD repeat is turned off.
Warning! Press the “STOP” button once to stop playback of the programmed compilation. The programmed compilation of titles continues to be stored. Press the “STOP” button a second time to terminate the program function and erase the programmed compilation. “PRG” indicated on the display is faded out. . Switching off the set Moisture penetrating the set can give rise to the danger of an electric shock! Only clean the laser scanning lens inside the CD compartment (if necessary) with a clean, dry brush.
such a manner that the above minimum distances are observed. • If audio CD playback is faulty or does not function at all, then this can indicate that a film of condensation has formed on the laser scanning lens in the CD compartment. This can happen if the set has been exposed to wide temperature fluctuations. Warning! NEVER open the case of the set! It does not contain any parts that can be repaired by the user. The warranty becomes null and void if the set’s case has been opened.