Operating Instructions eBench KH Portable CD Player/Radio GB Operating Instructions| Manual_KH2242_EN 1 16.09.
Contents GB . Technical Data.......................................................................................................................................................................... Radio ............................................................................................................................................................................................................................................. CD Player ....................................................
.. Repeat functions.............................................................................................................................................................................................................. ... Repeat track .................................................................................................................................................................................................................... ... Repeat CD...............................
. Technical Data Mains voltage: AC/alternating current: 220 V ~ 50 Hz DC/direct current : 12 V 1.5 V x 8 type C/LR14/UM2 Output: 2 x 1.2 watt (RMS) 30 watt (PMPO) Radio Reception range VHF/FM Reception range Medium-wave/AM 88 MHz to 108 MHz 540 kHz to 1610 kHz CD Player Laser Frequency response 3-beam laser 100 Hz to 16 kHz GB | Operating Instructions Manual_KH2242_EN 4 16.09.
. Use . Function The portable eBench KH 2242 CD Player/Radio is exclusively intended for … With the portable eBench KH 2242 CD Player/Radio you can … • • • • an entertainment electronics system the reception of radio stations playback of audio CDs private, non-commercial use • • Playback audio CDs Receive VHF and medium-wave radio stations Warning! We do not accept any liability/warranty for damage incurred as a result of incorrect use! GB Operating Instructions| Manual_KH2242_EN 5 16.09.
GB 6 | Operating Instructions Manual_KH2242_EN 16.09.
. Controls and displays .. Displays .. General 16. Frequency-range selector for radio 14. LCD display for CD player 18. Volume control 5. Function selector .. Miscellaneous .. CD 3. Loudspeakers 6. Headphones connection (3.5 mm diam.) 2. Power cable connection for alternating current 7. Battery compartment 15. Carrying handle 1. CD compartment 9. Play/Pause button 13. Stop button 12. Back button 8. Next button 10. Repeat button 11. Mix button .. Radio 4. Frequency-range selector 17.
. Point of installation and safety instructions Set up your new portable eBench KH 2242 CD Player/Radio on a level, smooth non-slip base.
• Exposure to moisture • Water entering the set • Overheating Place the set upside down on a soft base that cannot damage the case. Open the battery compartment on the underside of the set. . Getting started Prior to first time use .. Connecting to the power supply Remove any cardboard or plastic transport protection from the battery compartment. The eBench KH 2242 portable CD Player/Radio can be operated • • with batteries or with the supplied mains cable plugged into a power socket. ...
• Radio station reception suddenly ceases. Always exchange all 8 batteries together to ensure full power once again. Please note: Spent batteries must not be disposed of in the domestic waste. Hand in spent batteries at collecting or waste-disposal points or return them to the place where they were purchased. If you eventually dispose of the portable CD Player/Radio yourself, then ensure that the batteries are removed beforehand! ...
Turn the tuning control at the back of the set to tune in a radio station with good reception characteristics. The currently tuned frequency is indicated on the frequency range scale on the front of the set. Set the desired volume by turning the volume control on the back of the set. .. Enhancing the reception of radio stations The set is fitted with built-in antennas to receive radio stations in the frequency ranges FM/VHF and AM/Medium Wave.
CD will then be played. The display will indicate … • • The track number of the music title that is currently being played, for instance “1” for the first track on the CD, and “PLAY” to the left of the current track number. Set the required volume by turning the volume control at the back of the set. .. CD playback pause (PAUSE mode) To stop playback of the audio CD press the “Play/Pause” button once. “PLAY”, displayed to the left of the current track number, will start to flash.
Continue pressing the “Next”/”Back” button until the display indicates the number of the desired track. Playback of the selected track commences instantly without having to press the “Play/Pause” button. Release the “Next”/”Back” button as soon as the desired section within the track is reached. Playback from the selected point of the track is now automatically continued at normal speed. ..
... Repeat CD Press the “MIX” button once. To repeat all tracks on the audio CD press the “Repeat” button twice during playback of a music title. Playback of the current music track will instantly be stopped and a randomly selected track on the CD will be played instead. “PLAY” and “RDM” will be indicated on the display. Activation of CD repeat is indicated by “RPT” appearing on the LCD display to the left of the current track number.
. Cleaning . Functional faults Only use a slightly moist cloth to clean the case surface of the set. Ensure when cleaning that no moisture enters the set. Proceed in the following manner in the event of functional faults of the set … The inside of the CD compartment must only be cleaned with a clean, dry brush (e.g. lens brush available from photographic dealers).
Consult our service partner in your vicinity in the event of the following … • • If the functional faults described in Chapter 12 cannot be remedied in the described manner. If functional faults occur which are not described in Chapter 12. Please refer to the enclosed Warranty Card for our service partner addresses. Warning! NEVER open the case of the set! It does not contain any parts that can be repaired by the user. The warranty becomes null and void if the set’s case has been opened.