CV_KH2356_JOE1223_LB6.qxd 29.01.2008 14:03 Uhr Seite 1 6 BLUETOOTH HEADSET KH 2356 BLUETOOTH HEADSET Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
CV_KH2356_JOE1223_LB6.qxd 29.01.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 Index 13:45 Uhr Seite 1 Page 1. Safety instructions 2 2. Puting into use 4 3. Operation 8 4. Using the headset 11 5. LED status indicator 14 6. Troubleshooting 15 7. Cleaning and care 16 8. Technical Data 17 9. Disposal 18 10. Importer 18 11. Important Warranty Information 19 Read the operating instructions carefully before using the device for the first time and preserve this booklet for future reference.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 2 1. Safety instructions Intended Use The Bluetooth® Headset KH 2356 is designed for hands free operation when using a mobile telephone. The headset uses Bluetooth radio technology as well as a digital signal processor (DSP) to carry out phone call functions. This device may only be used for private domestic purposes, it is NOT suitable for industrial or commercial applications.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 3 General safety notices • Do not attempt to open or repair the device. Should you do so, the safety of the device may be compromised and the warranty becomes void. • Arrange for defective devices to be repaired only by Customer Services or by authorised specialists. • Never subject the device to moisture, extreme temperatures or extreme vibrations. Do not use the device in the rain. Attention! The device contains a Lithium polymer battery.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 4 High frequency signals in vehicles HF signals can, under certain circumstances, negatively influence the function of improperly installed or insufficiently shielded electronic systems in vehicles, e.g. electronic ABS, electronic tempo controllers and airbag systems. For further information about your vehicle or its possible ancillaries get in touch with the respective manufacturer or their representative.
IB_KH2356_JOE1223_LB6.qxd 29.01.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 6 Introduction Bluetooth is a wireless communication system with a short range. It makes possible wireless connections between Bluetooth devices such as, for example, mobile telephones, PDA and PCs. Bluetooth relates itself to a worldwide standard for operation in the internationally recognised ISM Frequency Range (Industrial, Scientific and Medical). Within the ISM Frequency Range (2,402 - 2,480 GHz), a data transfer range of approx.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 7 • Connect the power supply unit to an easily reachable and freely accessible power socket and/or the vehicle adapter in the cigarrette lighter socket (In vehicle receptical) of the vehicle. When the vehicle adapter and/or the power supply unit is connected to the power source the yellow operation LED will light up. • Insert the Mini USB plug of the power supply unit/vehicle adapter into the Mini USB input of the headset.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 8 3. Operation Switching the headset on and off Switching on The device is switched off. • Press and hold the Multi function button for 5 seconds, until an ascending sound effect can be heard. The LED status indicator blinks blue 5 times. After which the headset is in standby mode and the LED status indicator blinks blue every 3 seconds. Switching off The device is in standby mode.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 9 Coupling the headset with a mobile phone The headset was specially developed for mobile telephones, which support the Bluetooth Profile "Handsfree (HFP) and Headset (HSP)". Further information about Bluetooth radio technology is to be found in the operating instructions for your mobile telephone. Before you can use the headset you must couple it with a compatible mobile telephone (Pairing). • Check to make sure the mobile telephone is switched on.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 10 Coupling the headset with several mobile telephones You can couple the headset with up to eight compatible mobile phones. However, it can only be connected with one mobile telephone at a time. If a further mobile telephone is coupled with the headset, the coupling information of the first coupled mobile telephone is erased.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 11 Re-establishing the connection When you want to reconnect the headset with the default and/or the last used mobile telephone: • Make sure that Bluetooth is activated in the mobile telephone and switch the headset on. With the connection of a previously coupled mobile telephone, a pass code need not be entered.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 12 • For activation of voice dialling, press briefly the Multi function button once whilst in standby mode. After you hear a short, high signal tone you can speak the call number from your mobile telephone's assigned voice abbreviations. Voice dialing is only available with mobile telephones that support this function. Further information regarding voice dialing is to be found in the operating instructions for your mobile telephone.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 13 Rejection of a call • Press the Multi function button for 3 seconds until a short, high tone followed by a deep signal tone can be heard to reject the incoming call. Adjusting the volume of the hands free device You can adjust the volume of the hands free device with the + and buttons. • During a call press the + button repeatedly to increase the volume.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 14 5. LED status indicator Status Blue Switching on Blinks 5 times Switching off Coupling (pairing) Alternating blink blue and yellow Standby mode Blinks once every 3 seconds Call active Blinks twice every 2 seconds Call received Blinks twice every 2 seconds Low battery Charge Yellow Operation With the headset switched off hold down the Multi function button for 5 seconds.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 15 6. Troubleshooting If you cannot connect the headset to the compatible mobile telephone, proceed as follows: • Make sure that the Bluetooth function in the mobile telephone is activated. • Make sure that the headset is switched on and is being supplied with power. • If you use several Bluetooth devices, ensure that a previously created Bluetooth connection of the mobile telephone is disconnected.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 16 7. Cleaning and care Risk of electrical shocks. • Before every cleaning disconnect the device's power supply! Remove the power supply unit from the power socket and/or the vehicle adapter from the cigarrette lighter socket (In vehicle receptical) of the vehicle. • NEVER submerse the appliance in water or other liquids! • Do not permit liquids to penetrate into the casing! • Never open the casing of the device! There are no controls inside.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 17 8. Technical Data This device complies in regard to conformity with the fundamental requirements and other relevent regulations of the vehicle directive 2004/104/EG and the R&TTE directive 99/5/EG. Headset Input: Bluetooth Data: Supported Bluetooth Profiles: Frequency range : Battery: Charging time: Speaking time: Standby time: Operating temperature: Humidity: Dimensions (L x D x H): Headset weight: 5V 100 mA Version 2.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 18 Vehicle adapter Model: DC Input: DC Output: KH2356 12-24 V 5 ± 0,2 V 0,18A 350-450 mA 9. Disposal Do not dispose of the device in your normal domestic waste. Dispose of the device through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
IB_KH2356_JOE1223_LB6.qxd 29.01.2008 13:45 Uhr Seite 19 11. Important Warranty Information The warranty for this device is for 3 years from the date of purchase. Should you, in spite of our high quality standards, have grounds for complaint please contact our Service Hotline. In the event that processing of your complaint is not possible by telephone here you will receive • a processing number (RMA number) as well as • an address, to which you can send your product for warranty processing.
Date/Signature 13:45 Uhr Telephone Country Postcode/Place DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Warranty 29.01.2008 Street First name Last name Sender, please write clearly: In order to guarantee a cost free repair procedure please get in touch with the service hotline. Make sure you have your sales slip handy.
IB_KH2356_JOE1223_LB6.qxd 29.01.