Operating Instructions

- 5 -
To avoid the risk of accidents and
injuries:
• Never put your hand into the openings of the
appliance. Do not insert any objects of any kind
into the openings – except for the appropriate
stodger and the foodstuff to be processed. If
you do, there will be a serious risk of accidents!
• Unplug the appliance from the power source
before attaching or removing accessories.
• Do not leave the appliance unsupervised when
it is ready for use. To avoid it being switched on
accidentally, always unplug the appliance after
use or during breaks.
• Use only original accessories for this appliance.
Other accessories may not meet the safety
requirements.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never operate the appliance in a no-load con-
dition. This could irreparably damage the
appliance.
5. Assembly / Disassembly
IMPORTANT: All accessories are coated with
a thin film of oil to protect them from corrosion.
Therefore carefully clean all of the parts before
using the appliance for the first time, as com-
prehensively described on chapter "8 Clea-
ning". After subsequent usage, always apply a
light coating of cooking oil to the metallic
components.
a) Assembling the meat grinder
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Place the transport screw
y
into the mincer
casing
t
.
• Place the spring
u
onto the transport screw
y
.
• Then place on the cross blade
i
so that the
sharp side points away from the spring
u
.
Caution:
The cross blade
i
is very sharp! Risk of injury!
Important!:
The appliance will be damaged if the cross blade
i
is inserted the other way around!
• Select the appropriate cutting disc – the discs
are stored in the small compartment on the
appliance (Fig.

).
To open it, press on the symbol on the cover.
The cover can now be opened. Take out the
cutting disc that is required
o
.
• Position the cutting disc
o
so that the indenta-
tions in the cutting disc
o
lie on the fixing points
in the meat grinder casing
t
.
• When everything has been correctly assembled,
screw the ring clamp
a
on until it is handtight.
IB_KH3462_RP30168_LB6.qxd 10.02.2009 15:35 Uhr Seite 5