Hand Blender Operating Manual

- 5 -

KH 498
➩ Place the motor unit  on the lid ,
ensuring that it clicks in audibly.
Note: The arrows on the motor unit and
the accessory must stand one above the
other .
Operation
 Warning: Foodstuffs should not be
too hot. Squirted-out contents may
cause scalding.
 Fire Danger: Never exceed the maxi-
mum operating duration of 1 minute
for soft foodstuffs, respectively, 15
seconds for solid foodstuffs. Allow
the appliance to cool down for 2
minutes before switching it on again.
When you have assembled the hand
blender for your particular purpose,
place...
➩ The plug in the mains socket.
➩ Hold down the switch  to process
the foodstuffs at the standard speed.
➩ Hold down the turbo-switch  to
process the foodstuffs at the higher
speed.
➩ When you have completed processing
the foodstuffs, simply release the
switch.
Wall mounting
Included are 2 plugs and 2 screws to
enable the wall bracket  to be assem-
bled. We recommend mounting the
appliance close to a power point
➩ Mark the position of drill holes using
the appliance holder.
➩ Insert the dowels into the drill holes.
➩ Position the openings of the wall
bracket over the bored holes, then
fix it using both screws.
Cleaning
 Danger of electrical shock! Before
you clean the hand blender, unplug
the appliance from the power socket.
Under no circumstances may the
motor unit  be cleaned by immer-
sing it in water or holding it under
running water.
 Danger of injuries! To prevent inju-
ries, exercise caution when handling
the extremely sharp blade .
Reassemble the liquidiser after use
and cleaning to prevent injuries from
exposed knife blades. Keep the blade
out of the reach of children.
 Attention! The attachments of the
hand blender may not be cleaned in
a dishwashing machine, this would
damage them.
KH498_IB_UK.qxd 07.04.2006 9:59 Uhr Seite 5