HDMI DVD Player Operating Instructions
- 21 -
With DVDs:
By pressing the
OK button you select between the options Single, Repeat all
and Off.
• Select Single to continuously repeat the currently playing back chapter
until repeat playback is switched off or playback is cancelled by pres-
sing the
STOP button twice.
• Select Repeat all to continuously repeat all the chapters one after the other,
thus the entire film, until repeat playback is switched off or playback is
cancelled by pressing the
STOP button twice.
In the case of VCDs/S-VCDs:
By pressing the OK button you select between the options Single, Repeat all
and Off.
• Select Single to continuously repeat the currently playing back title of
the VCD/S-VCD until repeat playback is switched off or playback is
cancelled by pressing the
STOP button twice.
• Select Repeat all to continuously repeat the entire VCD/S-VCD until
repeat playback is switched off or playback is cancelled by pressing
the
STOP button twice.
• To switch off repeat playback press the
MODE button during playback.
Select from the Play mode menu under the menu item Repeat the option
Off. When you press the
MODE button again, repeat playback is swit-
ched off.
Repeat sequence (A – B)
With this function you can repeatedly playback a favourite sequence inside
a chapter of the currently playing DVD/VCD/S-VCD.
• During playback press the
A – B button on the remote control as soon as
the desired sequence starts to playback. Repeat A will be displayed on
the television screen.
• Press the
A – B button again as soon as the end of the desired sequence is
played back. Pay careful attention to the fact that the start and finish of
the sequence must be located within a chapter. Repeat A-B will be dis-
played on the television screen.
Repeat playback of the selected sequence begins immediately without having to
press the
PLAY/PAUSE button. The sequence will continuously repeat until
you press the
A – B button again in order to switch off the function. Repeat AB
off will then appear briefly on the television screen.
Bookmark function
During playback of a DVD/VCD/S-VCD you can place so called "Book-
marks" in order to view again later selected passages from a film. You can
set up to three bookmarks.
• During playback of a film press the
MARK button on the remote
control. On the television screen will be superimposed:
• As soon as the passage is reached, on which you want to place a book-
mark, press the
OK button on the remote control. The exact time position of
this passage within the film is now displayed in hours, minutes and
seconds under Bookmark 1.
• If you want to place another bookmark then press the control button
to select Bookmark 2 in the superimposed field on the television screen.
Press the
OK button again as soon as the passage is reached, on which
you want to place the second bookmark.
• Proceed in the same manner to place a third bookmark. Once you have
placed all the desired bookmarks press the
MARK button to fade out the
bookmark menu from the screen.
• Later if you want to skip to the passages, on which you have placed
bookmarks press the
MARK button again.
• Select the desired bookmark with the control buttons .
• Confirm the selection by pressing the
OK button on the remote control.
Playback of the selected chapter now begins automatically from the
position, at which you placed the selected bookmark.
• To delete placed bookmarks press the
MARK button on the remote control
to access the bookmark menu. Select a bookmark and press the
CLR button
on the remote control.
Setting playback volume
Press the VOLUME + button on the remote control during playback to increase
playback volume or the
VOLUME – button to reduce playback volume.
The changing of the volume between the values "0" (Sound off) and "16"
(Maximum volume) will be superimposed on the television screen.
Note:
The volume can not be changed in HDMI mode.
Dimmer
Press the DIMMER button on the remote control to reduce or increase the dis-
play brightness of the DVD player. In the display appears HIGH (bright),
NOR (normal), LOW (dark) or the display switches itself off.
Mute playback sound (Mute)
To switch the playback sound to mute press the MUTE button on the remote
control during playback of DVDs, VCDs/S-VCDs, Audio CDs and CD-Rs/ CD-
RWs with MP3 or WMA data. The symbol will be displayed on the
television screen. When you want to switch the playback sound back on
press the
MUTE button again or the VOL + and VOL – buttons.
Switching off the DVD player
To switch off the DVD player:
• In the event that a disc inserted into the DVD player is playing back, first
cancel playback by pressing the
STOP button on the front panel of the
DVD player or on the remote control twice.
• Open the disc tray to remove a currently inserted disc from the DVD
player by pressing the
OPEN/CLOSE button on the front panel of the
DVD player or on the remote control. Subsequently close the disc tray
by pressing the
OPEN/CLOSE button again.
• Press the
STANDBY button on the remote control. The DVD player now
switches to the
STANDBY mode. To switch the DVD player back on press
the
STANDBY button again.
• To completely switch off the DVD player press the
POWER button on the
front panel of the DVD player.
IB_KH6517_18_DVDPlayer_LB6.qxd 23.01.2008 19:07 Uhr Seite 21