4 GB +IRL PAHKS 2003 12.09.
4 GB +IRL PAHKS 2003 12.09.
4 GB +IRL PAHKS 2003 12.09.
GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 4 www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ CORDLESS CIRCULAR SAW PAHKS 18 V For sawing timber and plastic Please read carefully through the following information concerning safety and proper use. Before reading, fold out the page with the illustrations and make yourself familiar with all the functions of the equipment. Please read the operating instructions below and the accompanying safety advice carefully.
4 GB +IRL PAHKS 2003 + 12.09.2003 12:03 Uhr Seite 5 www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ Before carrying out any work on the saw, e.g. setting the guide plate etc., always remove the battery pack . Never remove sawdust or splinters whilst the saw is running – always switch off the saw and remove the battery pack first. When you are using the circular saw always wear ear protectors and protective glasses.
4 GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 6 www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ 07.If the tool is dropped or otherwise subjected to mechanical stress, you should have it examined by an appropriate specialist for damage before using it again. Damaged parts must be repaired. 08.Handle the battery pack carefully. Do not let it fall or be subject to impact. 09.Do not attempt to repair the charger or the battery pack yourself.
4 GB +IRL PAHKS 2003 + 12.09.2003 12:03 Uhr Seite 7 www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ SWITCHING ON AND OFF Before inserting the battery pack into the saw always check that the on/off switch is working properly and that when you release it, the switch returns into the OFF setting. This circular saw is fitted with a switch lock . The on/off switch does not lock itself on.
4 GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 8 www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ SETTING THE CUTTING DEPTH Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the material thickness. This should help to ensure you achieve a clean cut. Release the wing nut on the depth adjuster , set the required depth on the scale and retighten the wing nut.
4 GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 9 WARRANTY t D This piece of equipment is covered by a 3-year warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase to the closest service address.
4 GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 10 www.kompernass.
