PHLP 2000 2002 Operating and safety instructions
A B
HOT AIR GUN PHLP 2000 For removing, shaping, preheating, thawing, etc. Dear customer! We are delighted that you have decided to purchase our high quality PHLP hot air gun. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. Please read the operating instructions below and the accompanying safety advice carefully.
The equipment can quickly become a source of danger if you do not observe the safety instructions. Work with particular care when using the equipment near flammable materials. Never apply it for too long to one place. The high heat output of this equipment increases the danger of fire and explosion. The steam and gases produced can be dangerous to health. Make sure that your workplace is always well ventilated.
ADVICE ON WORKING METHODS, TIPS AND TRICKS Caution! Danger of fire and explosion. Working with plastics, paints, varnishes and similar materials can give rise to flammable and poisonous gases. This applies particularly when removing old paint. Start off your work using a low temperature setting and test to find out the most suitable temperature. The appropriate distance from the nozzle to the workpiece depends on the material you are working on.
STATEMENT OF CONFORMITY We, Kompernaß Handelsgesellschaft mbH, Burgstr.
© graphic design, photos, translations by ORFGEN Marketing & Communication Essen · Germany www.orfgen-nm.
