User manual
DVD/VCD/S-VCD
KH 6777
13. Playing DVDs, VCDs or S-VCDs
Proceed in the following manner to play a DVD/VCD/S-VCD
on the DVD Player …
1 Switch on the television to which the DVD Player is con-
nected.
2 Ensure that the DVD Player has been switched on and is
ready to operate.
If the television, the DVD Player and any other units that
may be connected (e.g. surround-sound system) are
operational and the DVD Player has been correctly con-
nected wto the television, “eBench“ and the “DVDVideo“
logo will be displayed on the television screen:
“NoDisc” is faded in on the television screen and on the
display on the front side of the DVD Player if no disc has
been loaded in the disc drawer of the DVD Player.
3 Open the disc drawer on the front of the DVD Player by
pressing once the “Open/Close”
button on the front
of the DVD Player or on the remote control. “Open” then
appears on the display on the front of the DVD Player
and on the television screen.
4 Load a DVD/VCD/S-VCD with label side facing upwards
in the disc drawer.
Please note:
DVDs, VCDs and S-VCDs that are to be played on the
DVD Player may have a country code printed on the
DVD sleeve. The DVD Player can only play DVDs/VCDs/
S-VCDs with the Country Code 2.
If no country code is printed on the sleeve of a DVD/
VCD/S-VCD …
• but rather the symbol , then the DVD/VCD/SVCD
can be played on the DVD Player, or
• the given DVD/VCD/S-VCD cannot by played on
the DVD Player. To check, simply by trying to play
the DVD.
5 Press the “Open/Close”
button on the front of the DVD
Player or on the remote control once again to close the
disc drawer. “Close” will be indicated on the display on
the front of the DVD Player and on the television screen
while the disc drawer is closing.
6 The contents of the DVD/VCD/S-VCD are now loaded;
this can take several seconds. In the meantime “Load”
will be ashing on the display on the front of the DVD
Player, and “Load” is displayed on the television screen.
7 The loaded DVD/VCD/S-VCD starts automatically.
Depending upon the loaded DVD/VCD/S-VCD, the lm
on the DVD may not be immediately played because an
option may rst appear on the television screen.
In such an event …
Select with the control buttons
on the re-
mote control, the menu item with which lm playing
is started.
8 To start playback of the lm …
• Press the “OK” button on the remote control once
or
• Press the “Play“ button on the front of the DVD Player
or on the remote control once.
“Play“ is briey displayed on the television screen, and the dis-
play on the front of the DVD Player indicates the following:
1 2 3 4 5
1
The DVD video symbol when a DVD has been
loaded or, when a VCD/S-VCD is loaded: “VCD“ or “S-
VCD”
IB_KH6777_EN 23.09.2003, 0:56 Uhr24