User manual


DVD/VCD/S-VCD
KH 6777
• Once for half the playback speed; “ 1/2” is displayed on
the television screen.
• Twice for one-fourth of the playback speed; “ 1/4” is
displayed on the television screen.
• Three times for one sixth of the playback speed; “ 1/6”
is displayed on the television screen.
• Four times for one seventh of the playback speed; “ 1/7”
is displayed on the television screen.
Please note:
Sound is not reproduced during slow playback.
2 To continue lm playback at the selected point in normal
speed, press once the “Play” button on the front of the
DVD Player or on the remote control “ Play” is once again
displayed on the television screen.
Single Frame Forward (Step)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
Proceed in the following manner to advance a lm of a loaded
DVD/VCD/S-VCD forward, frame-by-frame …
1 Press during play the “Pause/Step” button once to stop
play. The still picture of the chapter stopped, is displayed
on the television screen.
2 The still picture will then be advanced frame-by-frame
each time the “Pause/Step” button is depressed.
3 To return to lm play press once the “Play” button on
the front of the DVD Player or on the remote control.
Enlarging the picture (Zoom)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
While the lm on the loaded DVD/VCD/S-VCD is being
played it is possible to enlarge the picture on the televi-
sion screen in three stages by pressing on the “Zoom”
button on the remote control …
• Once for the rst enlargement stage; “ 1” is displayed
on the television screen.
• Twice for the second enlargement stage: “ 2” is displayed
on the television screen.
• Three times for the third enlargement stage; “ 3” is dis-
played on the television screen.
To turn o the zoom function and return to a normal picture
size, press the “Zoom” button a fourth time; “ O” is dis-
played on the television screen.
Changing the camera angle (Angle)
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
Some lms on DVD/VCD/S-VCD contain chapters which
were shot at dierent camera angles. When lms contain
such chapters then the same chapter can be watched from
dierent angles.
Press the “Angle” button on the remote control while the lm
of the loaded DVD/VCD/S-VCD is being played; the angle is
changed each time the “Angle” button is depressed.
Subtitle fade-in/fade-out
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol is displayed on the tel-
evision screen.
If the lm of the loaded DVD/VCD/S-VCD has subtitles, then
these can be displayed on the television screen by pressing
the “Subtitle” button on the remote control.
The subtitles will be displayed in the rst available language
on the television screen when the “Subtitle” button is de-
pressed for the rst time. The available languages are faded
in one after the other on the television screen each time the
“Subtitle” button is pressed.
“ “ is displayed on the screen, together with the number
of the currently faded-in language (e.g. “1/10” for the rst of
ten subtitle languages).
When the last of the available subtitle languages has been
faded-in (e.g. “10/10” for the tenth of ten available subtitle
languages), then the subtitle function can be turned o by
depressing the “Subtitle” button on the remote control once
again; “ O” is displayed on the television screen.
➧
For this subject please also refer to Chapter 13.1 “Subtitle
fade-in/fade-out”.
IB_KH6777_EN 23.09.2003, 0:56 Uhr28