PSS 260 IG N PAT EN EI GERMAN DESIGN PATENT T PEND G N DES Operating and safety instructions IN G · FOR 2 0 0 2
Operating instructions Kompernaß Handelsgesellschaft mbH Burgstraße 21 · D-44867 Bochum (Germany) Page 4- 7
PSS 260 ORBITAL SANDER For effortless sanding of metal, wood and varnish/paint … Dear Customer! We are delighted that you have decided to purchase our high quality PSS 260 orbital sander. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. Please read the operating instructions below and the accompanying safety advice ! carefully.
SWITCHING ON AND OFF When using the orbital sander you can select between continuous and non-continuous operation (see Fig. ). For short periods of sanding use the non-continuous setting and for longer periods use the continuous setting. Select your chosen setting as follows: SWITCH ON NON-CONTINUOUS OPERATION: SWITCH OFF NON-CONTINUOUS OPERATION: press ON/OFF switch . release ON/OFF switch .
MAINTENANCE OF THE ORBITAL SANDER 1. Clean the sander regularly. For the best results do this straight after the work has been completed. 2. Do not allow liquids to get inside the sander. Use a soft cloth for cleaning the housing. Do not use petrol, solvents or cleaners that may attack the plastic. 3. Air vents must always be clear and clean. ADVICE ON WORKING METHODS, TIPS AND TRICKS • • • • • You can use the PSS 260 orbital sander for effortless sanding even on large areas, see Fig. .
STATEMENT OF CONFORMITY We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: EC low voltage regulations: Electromagnetic compatibility: Applicable harmonised standards: (98/37 EWG) (73/23/EEG), (93/68 EEG) (89/336 EEG), (92/31 EEG), (93/68 EEG) EN 50144-1:1998 EN 50144-2-4:1995 EN 55014-1:1993+A1 EN 61000-3-2:1995+A1+A2 EN 61000-3-3:1995 EN 55014-2:1997 Type: PSS 260 Bochum, 30.06.
WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty.
© manual design, photos, translations by ORFGEN Marketing & Communication Essen · Germany