Waxer / polisher Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool. XQ 90 Waxer / polisher Operation and Safety Notes Kompernaß GmbH Burgstraße 21 44867 Bochum (Germany) Last Information Update: 03 / 2008 · Ident.-No.
1 2 4 3 A 5 B 6 C
Table of content Introduction Intended Utilisation...................................................................................................... Page Operating elements..................................................................................................... Page Items supplied.............................................................................................................. Page Technical Data...................................................................................
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Safety class II Observe caution and safety notes! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture.
Introduction / General safety advice for electrical power tools Q Technical Data Waxer / polisher PARKSIDE XQ90-KH3013 Rated voltage: 230 - 240 V ~, 50 Hz Rated power: 90 W No-load rotational speed: n0 = 3300 min-1 Polishing disc: ø 250 mm Protection class: II / & Noise and vibration data: Values determined in accordance with EN 60745. The sound pressure level (A-weighted) of the device is typically 60 dB(A). Uncertainty K=3 dB.
General safety advice for electrical power tools 2. Electrical safety To avoid danger to life from electric shock: a) T he mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body.
General safety advice for electrical power tools b) D o not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) P ull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device.
Commissioning / Operation / Cleaning and Maintenance Q Commissioning The mains voltage at the mains socket must match that shown on the rating plate on the device. Devices marked with 230 V ~ can also be operated at 220 V ~. Q Operation Q Placing the bonnet on the buffing plate 1. Turn the waxer/polisher over so that the polishing disc 2 is pointing upwards. 2. Place the bonnet 5 6 over the buffing plate 2 . Ensure that the bonnet 5 6 is placed centrally and taughtly onto the buffing plate.
Cleaning and Maintenance / Disposal / Information mains socket before carrying out any work on the device. Caution! Ensure that no fluids can permeate into the appliance, this could lead to the destruction of the product. The appliance is maintenance-free. j Use a slightly moist cloth to clean the housing, if necessary with a mild detergent. j When cleaning the housing, under no circumstances should you use strong detergents, solvents or abrasives. j Clean the bonnet by washing by hand in soapy water.