Oscillating Sander Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool. Oscillating Sander XQ 310 Operating and safety instructions Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Validity date of the Information: 06 / 2007 · Ident.-No.
1 2 3 11 10 4 7 5 6 6 9 8 A D B 12 E 7 9 C F
Table of contents Introduction Intended use............................................................................................................................... Page Features..................................................................................................................... Page Package contents...................................................................................................... Page Technical data.................................................................
Introduction The following pictogrammes / symbols are used in these operating instructions: n0 V~ w Read the operating instructions! Always wear ear protection, a dust mask, protective gloves, and safety goggles. Always heed warning labels and safety instructions! Always protect the appliance from rain and moisture. Moisture entering into an electrical appliance increases the risk of electrical shock.
Introduction / Safety Instructions Technical Data Nominal voltage: 230 V ~ 50 Hz Nominal power: 310 W Idle speed: n0 6,000 - 11,000 rpm Idle oscillation speed: max. approx. 22,000 rpm Oscillation circle: 2.1 mm Sanding paper size max.: approx. 280 x 115 mm Protection class: II / Information on sound levels and vibration: A-weighted noise level. Sound pressure level: 71 dB(A) Sound power level: 85 dB(A) and poorly lit working areas can lead to accidents.
Safety Instructions J When working outdoors, use only extension cords which are certified for use outdoors. The use of an extension cable suitable for employment outdoors reduces the risk of electrical shock. J Warning! - Never open the appliance. Arrange for repair or component replacement work to be carried out by the service centre or specialists for electrical repairs. this equipment reduces risks caused by dust.
Safety Instructions J accidents are caused by poorly maintained electrical tools. Use electrical tools, accessories, aids, etc. in accordance with these instructions and as directed for this special appliance type. Take consideration thereby of the working conditions and the task to be completed. The use of electrical hand tools for purposes other than those originally intended can lead to dangerous situations.
Safety Instructions / Operation Original ancillaries / and accessories J Only use accessories and tools that are specified in the operating instructions. The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Any questions? J You may begin the work once you have familiarised yourself with the instructions, functions and handling of the appliance.
Operation / Maintenance and Cleaning happen especially if the wood dust has paint particles on it or is mixed with other chemical substances and the sanded material is hot after extensive working. You should therefore avoid overheating of products being sanded as well as the appliance and always empty the dust collection box 4 or the dust bag of the vacuum cleaner before work pauses.
Cleaning and Maintenance / Disposal / Information appliance. Never permit fluids to permeate inside the appliance. j Use a cloth to clean the casing. Never use petrol, solvents or cleansers that damage plastics. A vacuum cleaner is required for thorough cleaning of the appliance. j Ventilation openings must never be obstructed. j Remove adhering sanding dust with a brush. Disposal The packaging is made from environmentally-friendly material and can be disposed off at your local recycling plant.