Installation Sheet

Hardwire installation (for hardwire models only)
OFF
ON
*Your circuit
breaker may
look different.
Shock Hazard. Electric shock could result in
serious injury or death. Make sure circuit
breaker is set to OFF before installaon. Must
be installed by a qualified electrician.
1
2
Using the provided twist-on connectors, connect the
wires as illustrated in the Wiring Diagram on the next
page. 0-10V oponal wiring available for 0-10V dimmers.
3
Secure Gravy Wall Sconce to the juncon box with
screws. A juncon box of at least 1.5” depth should be
used so that the LED driver will fit. LED driver should be
completely seated inside the juncon box.
Secure the round metal plate to the Gravy Wall Sconce
with screws.
4
0-10v dimmer wiring