Main menu(2) Back Key 27 Enter Key Menu deletion +/- Key Reset transmitter It is the menu displayed when "Enter" is pushed from the initial screen. Usage of the JogDial Delete the function from the menu list. CUSTOM1 and CUSTOM2 can be delete.(It is not possible to delete MASTER) Select the added list name. Move the cursor to either of CUSTOM1 or CUSTOM2 with Jogdial or +/- key and push "Enter" the function name that needs to be deleted and push "Enter".
JogDial +/- Key Reset transmitter Usage of the Features Main Menu Function Menu Connecting the receiver Notes on installing Description Index DRAFT Back Key MAIN MENU (3) 28 Enter Key
MAIN MENU (4) Back Key 29 Enter Key CONTRAST (LCD Contrast) +/- Key Reset transmitter It is the menu displayed when "Enter" is pushed from the initial screen. Usage of the JogDial Adjust contrast of LCD display. can adjust contrast at 8 stages. Adjusting the contrast to a very light setting in a high temperature Features Use "Jog dial" key or "+,-" keys. to adjust contrast of LCD display.
MAIN MENU (5) 30 Back Key Enter Key transmitter Usage of the JogDial Custom tone editor +/- Key Reset Move the cursor to the custom(1 to 6), using Jog Dial or "+,-" keys. Features In this example there is no data yet. Back to select number Main Menu Change data pointing cursor Return to Select number Use Jog dial or "+,-" keys to choice the sounds. and push Enter key. (A to Z.see down for details) The upper part is an interval. The lower part is length of a sound.
MAIN MENU (6) Back Key 31 Enter Key BACK LIGHT +/- Key Reset Set the lighting method of the backlight. transmitter This is the menu displayed when "Enter" is pushed from the initial screen. Usage of the JogDial Can choose from "AUTO" and "OFF". was done. or, when "auto display" are active. When didn't operate any key, the light will be Change Setting Setting will change when you pushed Enter key or Back key. off. (around 3 sec.) (Factory default is AUTO.) Function Key, ET lever, BT button.
MODEL SELECT 32 Back Key Enter Key transmitter Usage of the Select model memory JogDial Can save the setting for 9 car +/- Key Reset [How to open the screen] Features Use Jog dial or "+,-" keys to select MODEL SELECT at function menu. then Push "ENTER" key In MODEL SELECT Screen. Control Jog dial or +,keys to move the cursor at left side Main Menu Push Enter at the MODEL number to select. Back to function menu with out any changes when push BACK key.
ET POSITION Back Key 33 Enter Key +/- Key Reset [How to open the screen] At ET POSITION they displaed function name assigned and the value of each setup. Can change the assigned button to other button when use SET UP function (see page 60) AUTO DISPLAY DIRECT SET If a function is assigned to an ET lever, control contents of a controlled lever are displayed automatically.
SUB TRIM 34 Back Key Enter Key transmitter Usage of the Adjust the steering and throttle JogDial can not put to the center point of neutral position of servo, when only using the linkage of car. +/- Key Reset [How to open the set-up screen.] Features Main Menu Function Menu From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys.
A.B.S (Active Brake controll System) 1 Back Key 35 Enter Key +/- Key Reset [How to open the set-up screen.] transmitter Foil locks it with brakes and is effective when posture of a car collapses. As a result, a corner ring gets possible to be done smoothly. JogDial Usage of the Pumping brake will activate, when use brake at throttle. Features Main Menu Function Menu Connecting the receiver Notes on installing From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
36 A.B.S (Active Brake controll System) 2 Back Key Enter Key transmitter Usage of the JogDial ABS width and position +/- Key Reset Set pumping ABS movement will change at Control volume of Time throttle trigger and position of width. Base at Position Features of throttle triger. when width are 100. the servo move Brake Max Operating Trigger back to position to set, The servo didn' move back to Braking point to set when make small the value of width.
TH SPEED (Throttle speed) 1 Back Key 37 Enter Key It to slow the changes of signal, to make easy to controll the car. +/- Key Reset [How to open the set-up screen.] transmitter JogDial Usage of the Reaction velocity of a throttle is made late. Features Initial screen Function menu TH SPEED Main Menu Setup of SPEED and POSITION will change on setup of MODE. Function Menu In 1 WAY. can not select POSITION. Connecting the receiver Indication of TH.
38 TH SPEED (Throttle speed) 2 Back Key Enter Key transmitter Usage of the JogDial Throttle speed +/- Key Reset When control the throttle quickly, the car might be out of control. Use this function to limit the throttle speed. Features In this function can set Speed, Position, Mode. The Speed and Position setup will depend at mode setup. This function will effect when pull the trigger. It is not effective for Brake control.
TH PUNCH (Throttle punch) Back Key 39 Enter Key When move the throttle to forward or to brakes. can skip the first field. +/- Key Reset transmitter JogDial Usage of the To adjust only an initial reaction of throttle. [How to open the set-up screen.] Features When Push "Enter" at each Item . the cursor change to . Main Menu Function Menu From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:PUNCH" from Menu list.
40 TH CURVE (Thorottle curve) Back Key Enter Key transmitter Usage of the Put the curve on actual servo operation to the trigger operation of the throttle. JogDial In throttle operation, can be made quick or mild by hanging a curve to a signal. Besides, can +/- Key Reset brakes made quick or mild by hanging a curve. [How to open the set-up screen.] Features Main Menu Function Menu From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys.
TH BRAKE (Throttle Brake) Back Key 41 Enter Key Adjust only the brake of throttle. maximum brake will change. +/- Key Reset [How to open the set-up screen.] transmitter JogDial Usage of the Adjust only the brake of throttle. Features From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:BRAKE" from Menu list. In Electric car, When set value is too small the amplifier can not show better performance.
42 TH HIPOINT (Throttle high points) Back Key Enter Key transmitter Usage of the Set only the value of forward movement, on the throttle. JogDial Set only the value of forward movement on the throttle. use this function. Electric car use +/- Key Reset Highest point of ESC. Engine car use "High" [How to open set-up screen] Features Main Menu To Adjust the movement of servo, of the time that pull the trigger From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
TH PRESET (Throttle Preset) Back Key 43 Enter Key Use this function to set at ET or BT button. +/- Key Reset Can move at point you set when control the button assigned. [How to open the set-up screen.] transmitter JogDial Usage of the Move the throttle servo to set point, using by ET or BT button. Features Main Menu Use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list. Function Menu From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
44 TH ACCEL (Throttle Acceleration) 1 Back Key Enter Key transmitter Usage of the Set a awing at forward part of throttle. JogDial The expert driver using Delicate throttle work. In this function do automatically to make faster the cornering of the car +/- Key Reset [How to open the set-up screen.] Features Push enter at each item to change the cursor Main Menu Function Menu Connecting the receiver From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
TH ACCEL (Throttle Acceleration) 2 Back Key 45 Enter Key WIDTH(Width) Set the swing width transmitter +/- Key Reset Setting Item Usage of the JogDial POS.LOW(Low Position) Set the lower part of throttle trigger for swing action CYCLE(Cycle) Set the cycele of swing action Range of setting value Maximum Minimum Initial value 100 0 0 ACCEL POS.LOW 100 0 5 ACCEL POS,HIGH 100 0 50 ACCEL CYCLE 100 1 97 (Can not set higher value than POS.HIGH) (Can not set lower value than POS.
46 ST SPEED (Steering speed) 1 Back Key Enter Key transmitter Usage of the Make late the Speed of steering Servo. JogDial Limit the Max speed of Steering servo. Can set separately the Turn and Return. Divide between center of neutral and maximum rudder angle. It is possible to set each angle. (2 WAY) +/- Key Reset [How to open the set-up screen.] Features From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys.
ST SPEED (Steering Speed) 2 Back Key 47 Enter Key Time Maximum transmitter +/- Key Reset Usage of the JogDial Operating Wheel Returning Features Turning Neutral Time Maximum Speed changing point Servo movement Speed ge of Th Return1 e Th cha e sp can ngin ee be g po d ad int ra jus n ted Re ge o tu f rn 2 eed ran The sp ge of Th Turn1 e Th cha e sp can ngin ee be g po d ad int ra jus ng ted e Tu of rn 2 eed ran The sp Neutral End End Function Menu Neutral Setting Main Menu Neutral
48 ST PUNCH (Steering Punch) Back Key Enter Key +/- Key Reset [How to open the set-up screen.] Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. To reset the value Push together "+,-" keys. Function Menu Push Back key or Enter key to return at menu list. Notes on installing Servo Movement Connecting the receiver When large the set value, the moving volume become big. Effective at Steering linkage. But Don’t improve straightness.
ST CURVE (Steering Curve) Back Key 49 Enter Key +/- Key Reset Put a curve in Servo movement against for steering operation. Can set to quick curve or mild. curve. [How to open the set-up screen.] Features From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Main Menu Use "Jog dial" key or "+,-" keys. to choose the "ST:CURVE" from Menu list. Function Menu Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
50 ST BALANCE (Steering Balance) Back Key Enter Key transmitter Usage of the Adjusting the steering servo turning angle in the left and JogDial right directions independently. (Steering Balance) +/- Key Reset Adjust the steering servo turning angle in the left and right directions independently when turnig the wheel fully. Features [How to open the set-up screen.] Main Menu From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
ST TRAVEL(Steering Travel) Back Key 51 Enter Key +/- Key Reset Adjust the movement of steering servo when cut the steering wheel.. [How to open the set-up screen.] transmitter JogDial Usage of the Adjust the total movement of steering. Features Use "Jog dial" key or "+,-" keys. to choose the "ST:TRAVEL" from Menu list. Initial value is 100. Maximum value is 150. Minimum value is 0. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
