User Manual

Usage of the
transmitter
Features Main Menu
Connecting
the receiver
Notes on
installing
Description
Index
36
Back Key
Enter Key
JogDial
+/- Key
Reset
Function Menu
Set pumping
ABS movement will change at Control volume of
throttle trigger and position of width. Base at Position
of throttle triger. when width are 100. the servo move
back to position to set, The servo didn' move back to
point to set when make small the value of width.
The movement of servo getting bigger, when the
value at position setup are small.
BS doesn't function When set 0 to width, and then
set position to 100.
A.B.S (Active Brake controll System) 2
Back Key
Enter Key
JogDial
+/- Key
Reset
ABS width and position
ABS Cycle
ABS Delay
ABS Duty
advice
It will be easy to understand when servo connected instead of ESC at throttle
channel.
ABS function. it is depend at specification of servo.
Cycle
Neutral
Brake Max
Neutral
Brake Max
Operating
Trigger
Servo
movement
Operating
Trigger
Servo
movement
Time
Time
Width
Braking
Pos (beginning)
B
A
A : B=Duty
N
Setting
ABS.WIDTH
ABS.POS
50
30
Set cycle of pumping action.
When make large the value. the servo move fast and cycle become short.
Set delay of ABS Action.
Make strong the brake when put the delay at this function
Set ratio of time to brake and time to release the brake with 7 stages.
D
RAF
T