User Manual

Usage of the
transmitter
Features Main Menu
Connecting
the receiver
Notes on
installing
Description
Index
38
Back Key
Enter Key
JogDial
+/- Key
Reset
Function Menu
When control the throttle quickly, the car might be out of control.
Use this function to limit the throttle speed.
TH SPEED (Throttle speed) 2
Throttle speed
MODE
POSITION
SPEED
Throttle Speed
Indicator
advice
As same as Engine car, This function are functioning also at The Electric car that using ESC.
Back Key
Enter Key
JogDial
+/- Key
Reset
When controll trigger position will appear
If throttle trigger are active the throttle indicator will blink
Can set at ET the speed of each aria (see page 60)
The value can set at ET are when set TH:SPEED at 100%
Can assign ON/OFF function at ET or BT button.
Even the value are not effective the light will be blinking when ON the function.
A setting item changes by setting value
Normally 100 is the Setting value. when make it smaller
the value reaction of servo getting smaller too.
The value of Position 1 are always same or smaller then
position 2.
1 WAY: Use full area for the throttle trigger control
2 WAY: Divide to 2 areas the throttle trigger control
3 WAY: Divide to 3 areas the throttle trigger control
This function will effect when pull the trigger. It is not effective for Brake control.
In this function can set Speed, Position, Mode.
The Speed and Position setup will depend at mode setup.
Choose from 1 to 3 WAY
Set the divition of area
Set each speed of each
area
D
RAF
T