User Manual

Usage of the

transmitter

Features Main Menu

Connecting

the receiver

Notes on

installing

Description

Index

Back Key

Enter Key

JogDial

+/- Key

Reset

Function Menu

Set only the value of forward movement, on the throttle.

TH HIPOINT (Throttle high points)

To Adjust the movement of servo,

of the time that pull the trigger

Set only the value of forward movement on the throttle. It is easy to set up especialy on Engine car.

When make large the value at Engine car, a burden of Servo to increase. please check the movement while

adjust the value.

In Electric car, When set value is too small the amplifier can not show better performance. Please start from

100 (factory setting) the setup.

Minimum value are 0, but doesn't operate to forward.

advice

Throttle trim is a center trim.When made small the value of "TH HIPOINT".

and then, when set large value to an advance direction of the trim.the amount

of operation extremely will be small.(Please see page 23 about Center trim)

Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.

Use "Jog dial" key or "+,-" keys. to choose the "TH:HIPOINT" from Menu list.

From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.

[How to open set-up screen]

Set only the value of forward movement on the throttle. use this function. Electric car use

Highest point of ESC. Engine car use "High"

RAF