User Manual

Usage of the
transmitter
Features Main Menu
Connecting
the receiver
Notes on
installing
Description
Index
51
Back Key
Enter Key
JogDial
+/- Key
Reset
Function Menu
Adjust the total movement of steering.
ST TRAVEL(Steering Travel)
ET-4
advice
Use Steering balance (see page 50) to adjust Right and left individually.
do not set at excessive angle.
It will cause of damage to the servo
Steering will not function, When the value of
steering travel are 0.
Press "Enter Key" or "Back Key",back to function menu list screen.
Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value.
Push "Enter" key. to enter setup menu. Use "Jog dial" key or "+,-" keys, to adjust the value.
Initial value is 100. Maximum value is 150. Minimum value is 0.
Use "Jog dial" key or "+,-" keys. to choose the "ST:TRAVEL" from Menu list.
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu.
ET4 assign initialy for steering travel. when control ET4 Indication such as the
right appears.
The number displayed that is a ratio for a number set up at steering travel
function.
[How to open the set-up screen.]
Adjust the movement of steering servo when cut the steering wheel..