K-one K-two User manual
IMPORTANT SAFETY INSTRUCTION • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Follow all instructions – All operating and use instructions should be followed. WARNING! • WARNING – Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.
COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
BOX CONTENTS 1. Power cord 2. KONEX K-one or K-two portable speaker 3. User manual 3. 2. 1. TECHNICAL SPECIFICATIONS MODEL TYPE HF DRIVER LF DRIVER POWER (RMS) POWER (MAX) FUNCTIONS AUX INPUT FREQ. RANGE POWER SUPPLY BATTERY DIMENSIONS NET WEIGHT K-one or K-two 2-WAY CONFIGURATION WITH ACTIVE FILTER 2.75’’ DOME TWEETER WITH 1’’ VOICE COIL 4’’ WITH 1’’ VOICE COIL 50W 100W BLUETOOTH, USB, AUX INPUT, BASS, TREBLE,PAIR BUTTON, STEREO 3.5MM 60Hz-20kHz (@-10dB) AC 100V-240V 50/60Hz 7.4V/4.
FUNCTIONS 8. 2. 3. 4. 5. 1. K-two 6. 7. K-two 9. 100-240V AC~ 50Hz-60Hz AUX Input USB AC Input S/N: 10. 1. POWER SWITCH 2. VOLUME CONTROL 3. BASS CONTROL 4. TREBLE CONTROL 5. PAIR BUTTON 6. BATTERY LEVEL 7. PAIRING STATUS LED 8. AUX INPUT STATUS LED 9. AUX INPUT 10. USB INPUT 11. POWER INPUT 11.
BLUETOOTH PAIRING PAIR YOUR DEVICE : 1- When power on, the BT LED(7.) flash qulicky, pairing mode is automatically activated. 2- Search for KONEX K-one or K-two on your device and connect. BT LED (7) will change to slow flashing light. NOTE: You cannot start a new pairing request while a device is already connected. You must 1st disconnect the first device and then start pairing. Press and hold PAIR button(5.) for 1 second to disconnect pairing or restart pairing when your device has the connection memory.
CHARGING The Konex K-series is equipped with a long life lithium-ion battery. If battery level is too low ( check battery level LED(6.)), you have to charge your Konex device. Use supplied power cable to charge your device. Charging time : 4 hours NOTE: You can use your Konex K-series player straight out from the box, but it is recommended to process a full charge of 4 hours before you use it the first time in order to get optimum battery life. MOBILE APP APP available to fully control your KONEX device .
www.konexaudio.
