User guide Conference phone Konftel 100 Dansk I Deutsch I English I Español I Français Italiano I Norsk I Suomi I Svenska Intelligent communications
Description Connection, accessories, spare parts Calling Incoming calls Outgoing calls Redial Three-party calls Programming the R key Conference key Volume control, mute, tuning, ring signal volume Troubleshooting and maintenance Technical data Konftel 100 • User Guide 4 5 6 6 6 6 6 7 8 9 10 11 English Contents
4 Description Top Green/red mic indicators Microphone English Loudspeakers Keypad Bottom Telephone line input (POTS) Power supply Keyset OK key Conference key R key Up/Down key Mute/Pause key Redial key Konftel 100 • User Guide
Description 5 Connection 240 V mains outlet Mains transformer Only a mains transformer type ML120P070G or FRIWO FW7237/12 may be connected. Power supply and analogue POTS network cable, 7.5 m. Connectors underneath Konftel 100 Accessories Item No. 9146030 149110 900103339 900103340 900103341 Spare parts Description Wall mounting bracket Ceiling mount suspension with cables Extension cable, power supply 10 m Extension cable, analogue network, 10 m Extension cable, power and analogue network 7.
Calling 6 Incoming calls A ring signal is heard and the green mic indicators light to indicate the incoming call. Press the OK key to answer. English To end the call, press OK. Outgoing calls Press OK. 0-9... Dial the number. To end the call, press OK. Redial Press the Redial key. The last number dialled within 3 sec. To end the call, press OK. Three-party calls Press OK. 0-9... Enter the number of the first meeting participant.
Calling 7 If your three-party call is not answered Press the R key followed by the 1 key to return to the first call. English Note: The availability and function of the three-party feature can vary from country to country but also depend on the PBX to which the Konftel 100 is connected. If you want to connect multiple participants we recommend you use a telephone meeting service. If you have questions regarding availability, please contact your dealer.
8 Conference key The Conference key gives you the facility to pre-programme a number or code for your phone conference. Programming the Conference key English Keep the Conference key depressed 3 sec until the red LEDs flash and you hear a repeating tone. 0-9... Enter your phone conference number with the keypad (max 20 digits). If Konftel 100 must wait for a second dial tone, you should insert a pause with the Mute/ Pause key. Press the OK to end and save the number.
9 Volume control, mute, tuning, ring signal volume Volume control Adjust the speaker volume with the Up/Down key during the call. Press the Mute key to switch off the microphone. The mic indicators change to red. Press again to switch on the microphone. The mic indicators change back to green. Tuning The sound is adjusted automatically for the room and the telephone line when Konftel 100 is switched on. Konftel 100 senses the acoustics of the room and adapts continuously during the call.
10 Troubleshooting and maintenance Troubleshooting 1. Check that the microphone is on during the call. The green microphone indicators must be lit. English 2. Check that the Konftel 100 is connected to an analogue telephone jack. 3. Bypass any extension cables and check whether the system is functioning correctly. If not, contact your dealer. 4.
Technical data 11 Konftel 100 Network interface: Analogue PBX or PSTN, RJ-11. Power supply and network cable: 7.5 metre, RJ-11 (line), EIAJ Class IV (power). Recommended room conditions: Reverberation time: <0.5 sec. Background noise: <45 dB(A). Frequency response: 200 – 3700 Hz. Loudspeaker volume: 85 dB SPL. Room echo suppression: 208 ms. Line echo suppression: 25 ms. Automatic calibration: <1 ms impulse (not discernible). Dimensions: Diameter 232 mm. Weight: 700 g.
Konftel Technology is a leading company within loudspeaker communication and audio technology. We develop and sell products and technology for telephone meetings based on cutting-edge expertise within acoustics and digital signal processing. Characteristic of our products is that all conference telephones contain the same high quality audio technology – OmniSoundTM – providing crystal clear sound. Learn more about Konftel Technology and our other products on www.konftel.