The Konftel 300 User Guide ENGLISH
OmniSound® HD – Optimal sound By incorporating full duplex audio, the patented audio technology OmniSound® guarantees the audio conference an impressive and crystal clear sound in both directions through a hypersensitive microphone with 360° sound pickup and speakers that provide powerful sound distribution to all participants. OmniSound® HD offers HD audio transmission for VoIP calls.
TABLE OF CONTENTS Description 2 General................................................... 2 Maintenance........................................... 2 Keypad................................................... 4 Navigation and selection in menus............ 5 Ending a recording..................................19 Listening to a recording.......................... 20 Managing recordings...............................21 Adjusting the recording indicator..............21 Displaying recording feature status....
DESCRIPTION GENERAL The Konftel 300 conference phone offers a host of innovative features: • OmniSound® HD audio technology. • USB connectivity allows the phone to be used to make VoIP calls. • The line mode enables you to combine and switch easily between connectivity technologies – analogue, USB, mobile (GSM/DECT). • Conference guide for easy set-up of multiparty calls. • Record your meetings with an SD memory card so that you can listen to them later on.
DESCRIPTION Speaker Microphone Display screen Keypad LEDs SD memory card port LEDs Flashing blue Incoming call Steady blue light Call in progress Flashing red Hold, microphone and speaker turned off Steady red light Mute, microphone turned off Expansion microphone port Mobile/DECT phone connection Analogue line connection AUX port Mini USB port for PC connection Security lock port Expansion microphone port Power supply port 3
DESCRIPTION KEYPAD UP ARROW navigation in menus, display of call list MENU, settings menu DOWN ARROW navigation in menus, display of call list C, no/end/back recording OK, yes/confirm choice Answer/connect calls and Flash Increase volume Hang up/end call Decrease volume CONFERENCE automatic dialling of conference groups MUTE the caller cannot hear you HOLD puts a call on hold Alphanumerical buttons, phonebook LINE MODE, connectivity options Writing text Each button contains letters and character
DESCRIPTION NAVIGATION AND SELECTION IN MENUS Press MENU. Select the option you want from the menu using the arrow buttons. Confirm by pressing OK to select the marked option. Cancel the setting or go back one level in the menu by pressing C. Quit the menu by pressing MENU again. Note that after you have made changes to a setting, you must press OK to activate the setting. Writing style in instructions In the instructions, MENU > SETTINGS means you should: Press MENU.
CONNECTIONS UNPACKING Check that all parts are included in the package. If any parts are missing, please contact your retailer. • • • • • • The Konftel 300 conference phone Power adapter with universal socket compatibility 7.5 metre cable for electric power and line connection 1.5 metre USB cable Intermediate plugs for analogue connection Quick reference guides in different languages CONNECTING AND INSTALLING Connect to an analogue line, wireless DECT telephone/mobile phone or PC as illustrated.
CONNECTIONS Select the language you want. Click OK to confirm your selection. Select MENU > SETTINGS if you want to set the date and time or make other adjustments. CONNECTIVITY OPTIONS An analogue phone line is the pre-programmed option, but it is possible to switch between and combine two connectivity options. Press the LINE MODE key. Use the arrow buttons to select a connectivity option and press OK to confirm your choice.
ANSWERING AND MAKING CALLS ANSWERING CALLS A ring tone is heard and the blue LEDs start flashing. Press to answer. The LEDs show a steady blue light. The duration of the call is shown on the display screen. ENDING CALLS End the call by pressing . MAKING CALLS Dial the number. Press . The number is called and the LEDs show a steady blue light. The duration of the call is shown on the display screen. Or: Press . Dial the number.
ANSWERING AND MAKING CALLS MAKING THREE-WAY CALLS ON AN ANALOGUE LINE The simplest way to set up a multi-party call is to use the conference guide (see page 13). You can connect another party to an on-going call as follows. During a call, the button acts as R-pulse (flash), which means it transmits commands to the PBX. If you experience problems making multi-party calls: Different PBXs may require different signals. Please contact your telephone administrator or service provider.
ANSWERING AND MAKING CALLS Answering a VoIP call Press . The Konftel 300 has now been put into call mode and the LEDs show a steady blue light. Indicate whether you want to start the call by answering in the computer’s VoIP software. The Konftel 300 functions as a speaker and microphone for the computer. Ending a VoIP call End the call in the computer’s VoIP software and put the Konftel 300 on stand-by by pressing . The Konftel 300 now only functions as a speaker for the computer.
DURING A CALL ADJUSTING THE SPEAKER VOLUME Adjust the speaker volume using the buttons and . Adjusting the speaker volume when two lines are connected If you have selected double lines, you can adjust the volume level for each line. This is useful if the lines have different volume levels. Press the button or the button to display the current volume setting. The current main volume appears on the display screen.
DURING A CALL SWITCHING LINES DURING CALLS Connecting a new line during a call You can add another line or switch between connected lines during a call. Press the LINE MODE button during the call. An indicator appears on the display screen in front of the selected line(s). Use the arrow buttons to mark the line you want to connect and confirm your choice by pressing . If you selected USB or MOBILE, this line will open. You then connect the call via the computer or mobile phone.
CONFERENCE GUIDE The conference guide allows you to create 20 conference groups with up to six people in each. You can now call the participants in a meeting by simply pressing a few buttons. You may need to adjust some settings in your Konftel 300 to make it compatible with your PBX. Please turn to page 16 in this User Guide for more details. Entering text with the keypad Please turn to page 4 for instructions on using the keypad to enter text.
CONFERENCE GUIDE MAKING MULTI-PARTY CALLS Press the (Conference) button. Select QUICK GUIDE with the arrow buttons. Press OK to confirm. The Quick Guide asks you to dial the first number. Dial the first person’s telephone number. Press OK to confirm. Press OK when the first person has answered. Press OK to call another person and repeat the above steps. Press C when you have called all the persons you want for your meeting.
CONFERENCE GUIDE DELETING CONFERENCE GROUPS Select MENU > CONF GUIDE > ERASE GROUP. Mark the group you want to delete and press OK. Confirm that you really want to delete the group by pressing OK or cancel the deletion of a group by pressing C. DELETE ALL CONFERENCE GROUPS Select MENU > CONF GUIDE > ERASE ALL. Confirm that you really want to delete all groups by pressing OK or cancel the deletion of all groups by pressing C.
CONFERENCE GUIDE DISPLAYING CONFERENCE GUIDE STATUS Select MENU > CONF GUIDE > STATUS. The display screen indicates the number of conference groups already stored plus how many more groups can be added.
PHONEBOOK The Konftel 300 has a phonebook that holds up to 50 entries. See page 8 for making calls via the phonebook. Entering text with the keypad Please turn to page 4 for instructions on using the keypad to enter text. SEARCHING FOR CONTACTS The simplest way to search for a contact in the address book is to hold down a number button for two seconds (see page 8). You can also search for a contact via the PHONEBOOK menu. Select MENU > PHONE BOOK > SEARCH CONTACT. Mark the contact you want.
PHONEBOOK DELETING CONTACTS Select MENU > PHONE BOOK > ERASE CONTACT. Mark the contact you want to delete and press OK. Confirm that you really want to delete the contact by pressing OK or cancel the deletion of a contact by pressing C. DELETING ALL CONFERENCE GROUPS Select MENU > PHONE BOOK > ERASE ALL. Confirm that you really want to delete all contacts by pressing OK or cancel the deletion of a contact by pressing C. DISPLAYING PHONEBOOK STATUS Select MENU > PHONE BOOK > STATUS.
RECORDING It is possible to record a phone conference on an SD (Secure Digital) memory card so you can listen to it later on. A flashing symbol appears on the display screen during recording. A beep is heard every 20 seconds so that other parties in the call know it is being recorded. The beep can be turned off (see page 21). The recorded call is saved on the memory card. The document is named after the time at which the recording began (e.g. 14-35-01.wav) and is saved in a folder with the current date.
RECORDING LISTENING TO A RECORDING You can listen to a recorded phone conference on your Konftel 300 or a computer using an SD memory card reader. Recordings are saved in .wav format and can be played back on your choice of media player. Listening to recordings on the Konftel 300: Select MENU > RECORDING > PLAYBACK FILE. Mark the folder you want (date) and press OK to confirm. A list of all recordings for the specified date is displayed. Names, date, time and length are displayed for each recording.
RECORDING MANAGING RECORDINGS Editing the name of a recording The recording is named by default with the time at which the recording started. Select MENU > RECORDING > RENAME FILE. Mark the folder you want and press OK to confirm. Mark the recording to be edited and press OK. Make the change and press OK to confirm. Delete a number or a letter in a name by pressing C.
SETTINGS SELECTING LANGUAGES Select MENU > SETTINGS > LANGUAGE. Select the language you want and press OK to confirm. SELECT REGION The first time the Konftel 300 is started, you will be required to select the region in which you are located. The Konftel 300 then automatically configures to the telecom network for that region. Your selected entries can be changed later via this menu. Select MENU > SETTINGS > REGION. Select the region in which you are located.
SETTINGS ADJUSTING RING LEVEL VOLUME Select MENU > SETTINGS > RING LEVEL. Select your choice and press OK to confirm. There are six volume levels plus a silent mode. You will hear the ring tone for each level you select. If you select silent mode, an LED on the phone flashes when an incoming call is received. ADJUSTING THE FLASH/R PULSE DURATION The Flash/R pulse (Register recall) is used to request a new line from the PBX.
SETTINGS ADJUSTING MICROPHONE VOLUME WITH MOBILE PHONE CONNECTED The Konftel 300 microphone has seven volume settings, so if the volume of calls via DECT/mobile phones is too soft or too loud, you can easily adjust it to the right level. Select MENU > SETTINGS > MOBILE LEVEL. Select your choice and press OK to confirm. ADJUSTING SOUND (EQUALIZER) The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and BRIGHT). Select MENU > SETTINGS > MOBILE LEVEL.
SETTINGS CHANGING TEXT ON THE DISPLAY SCREEN The text on the display screen can be changed when the Konftel 300 is on hook. Select MENU > SETTINGS > SCREEN TEXT. Delete existing text using C and enter your new text. Press OK to confirm. ADJUSTING LCD CONTRAST Select MENU > SETTINGS > LCD CONTRAST. Select your choice and press OK to confirm. CONNECT A REMOTE CONTROL – PAIRING Select MENU > SETTINGS > REMOTE CONTROL on the conference phone.
SETTINGS SETTINGS DURING A CALL The HEADSET/PA, PHONE BOOK, MOBILE LEVEL and EQUALIZER menus may be accessed during a call and are displayed when the MENU button is pressed. The first option is either HEADSET or PA depending on whether PA is activated or not. These HEADSET/PA settings can only be accessed when a call is connected. Turn off the internal speakers when using a headset PA should not be activated when using the HEADSET menu option.
UPGRADING SOFTWARE The Konftel 300 is continually being developed with smart features. You will first need to install Konftel Upgrade utility on your computer before you can upgrade your Konftel 300. Find out more at www.konftel.com/upgrades. INSTALLING KONFTEL UPGRADE UTILITY Go to the website www.konftel.com/upgrades and select Konftel 300. Click to download Konftel Upgrade utility. Install the software on your computer. Follow the instructions given by the installation program.
TECHNICAL SPECIFICATIONS Size Diameter 240 mm, height 77 mm Weight 1 kg Colour Charcoal black Display screen Illuminated graphics (LCD), 128x64 Keypad Alphanumerical 0–9, *, off hook/F, on hook, mute, hold, volume up, volume down, 5 buttons for menu navigation, line mode, conference guide Anti-theft protection Kensington security slot Memory Support for SD memory cards up to 2 GB Upgrades The Konftel Upgrade utility upgrades Konftel 300 software via the USB connection Connectivity Analogue t
TECHNICAL SPECIFICATIONS Environment Temperature 5°–40°C Relative humidity 20–80% condensation free Recommended acoustic conditions Reverberation period: 0.
SERVICE AND GUARANTEE If anything is wrong with your Konftel unit, please contact the place of purchase. Guarantee We give a two-year guarantee on our conference telephones. Service Service is offered after the expiration of the guarantee. Please contact your retailer and ask for a cost estimate. Konftel support If you have any questions about the guarantee and service, please contact your Konftel support centre Europe: +46(0)90-706 489 (Monday–Friday 8.00–17.00 GMT+1) E-mail: rma@konftel.
Konftel is a leading company and the world’s fastest growing brand, within audio conferencing equipment. Since 1988, our mission has been to help people around the world to conduct meetings despite distances. Based on our success, we know that audio conferencing is a great way to save time, money and at the same time contribute to a better environment. High audio quality is essential for efficient meetings, this is why our patented audio technology OmniSound®, is built into all Konftel Conference phones.