User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 1 Setting up the printer
9
3. Slide the paper path lever to the symbol
or the position of "AUTO".
The lever position should be at "AUTO" when using the printer
driver.
4. Connect the printer to the computer and perform a
trial printing.
The display appears as below along with the sound of buzzer
when the printer receives the data from the computer.
5. Insert a cut sheet paper straight along the paper
guide.
If a paper is inserted on the skew, the printer detects it.
Then the printer adjusts the skew automatically for the certain
skewed angle.