User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 2 Control panel operation
20
2.1.2 Function keys
1. ONLINE Press the ONLINE key to change the printing enabled (online) state an
d
printing disabled (offline) state.
2. RESET (ALT + ONLINE keys)
Press the ONLINE key for two seconds or more while you press the ALT
key, a buzzer will sound. Then “INITIAL” is displayed on the LCD if the
keys are released. The printer is reset immediately.
4. HIGH IMPACT
Press the HIGH IMPACT key to change the print mode. Can open an
d
close multipart print mode.
6. ENTER
The setting are fixed by pressing the ENTER key.
5. MENU (ALT + HIGH IMPACT keys)
Press the MENU key to enter the SETUP MODE. See the Chapter 3
Setup options for details.
3. SPEED
Press the SPEED key to display the currently selected printing quality o
n
the LCD. Each press of the key to display the printing qualities in the
following order.
LQ
HIGH SPEED 2
NORMAL
HIGH SPEED 1