User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 4 How to use SETUP Memory
28
Chapter 4 How to use MENU Memory
This printer has total 6 types of MENU Memory 1 - 6.
Various MENU stated in the chapter 3 can be memorized in every memory.
The memory type in current operation is normally indicated with the number on the LCD as shown below.
Å Indicating that the printer is operated at the mode of
MEMORY 1.
The MENU memory is changed by pushing the FORMAT key.
If pushing the key first.
The above display appears and the printer sets into the mode of MEMORY CHANGE. If pushing the
FORMAT key each time, the memory numbers are changed as shown below.
1 Æ 2 Æ 3 Æ 4 Æ 5 Æ 6
The MENU memory is specified by pushing the ENTER key.
The printer is initialized automatically once the memory setting is changed.
If the ENTER key is not pushed for 3 seconds, the message on the LCD returns to the normal display.
When every MENU memory is set, each MENU should be changed by referring the chapter 3 after
selecting the memory number.