User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 23 -
3
SPEED
1. In OFFLINE mode, press SPEED key once can display the current
speed on the LCD, press this key one more time will change the
speed in turn, lossen the key to choose the shown print speed. As
shown below.
2. In the Menu Setup Mode, press SPEED to exit the submenu.
4
HIGH IMPACT
1. Press HIGH IMPACT key, current copy state will be shown on the
LCD, press this key once more can change the copy state in turn
lossen the key to choose the shown print consistence, as shown
below:
2. In the Menu Setup Mode, press HIGH IMPACT key to exit the
setting.
5 MENU
Press ALT and HIGH IMPACT keys at the same time to enter Menu
Setup Mode.
Note: Both Online and Offline are OK.
6
ENTER
In the Menu Setup Mode, press ENTER key to confirm and save the
settings.
7
ALT
The following functions are executed by pressing the corresponding
key while you press the ALT key.
ALT + LF → MICRO LF
ALT + RLF → MICRO RLF
ALT + HIGH IMPACT → MENU SETUP
ALT + SPEED → RESET (Initialize the printer, clean the printing buffer.
Note: It should be long pressed.)
ALT + TEAR OFF → FF
8
EJECT/LOAD
1. In tractor paper mode, if there is no paper in the printing home
position, press this EJECT/LOAD key to feed paper; If there is paper
in the printing home position, press this key can eject the paper to
parking position.
2. In manual paper feed mode, if there is no paper in the printing home
position, EJECT/LOAD key is invalid; If there is paper in the printing
home position, press this key can eject the paper.
9
TEAR OFF
1. When the paper is in the printing home position, press TEAR OFF
key, the printer will feed paper to tear off position automaticallly (Only
for tractor paper), press this key once more, the printer will feed the
paper back to the printing home position.
2. In the Menu Setup Mode, press TEAR OFF key to enter submenu.
OFF
ON
EJECT/LOAD
HIGH IMPACT
MENU
SPEED
RESET
HIGH IMPACT
+
ENTER
MENU ALT
ENTER
ALT
ENTER
ALT
TEAR OFF
FF
HIGH 1
HIGH 2
NORMAL
LQ