User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 26 -
ERROR (Amber)
ON: Printer is paper out or malfunction occurs.
OFF: No error is detected.
BLINK: Functional error has occurred
HIGH IMPACE (Green)
ON: In copy printing mode.
OFF: In normal printing mode.
3.1.7 Shortcut Key Function
Function Key
Resume default setting
(Initialization 1)
HIGH IMPACT + LF+POWER
Chinese self-test
LF + ONLINE + POWER
ASCII self-test
LF + POWER
H-Dump
SPEED + POWER
Print out the current menu
setting
SPEED + HIGH IMPACT + POWER
Character H printing mode
① TEAR OFF + POWER
Note: Print out one page by manual or tractor.
② EJECT/LOAD + TEAR OFF + POWER
Note: Continuously print out test paper by manual or
tractor.
Pin testing HIGH IMPACT+POWER
Adjusting the printing home
position
In Online mode, long press ENTER + ONLINE keys.
LF key: Advance
RLF key: Backwards
ENTER key: Confirm and save
HIGH IMPACT key: Give up the setting, just press this key to
exit and the printer will restart.
Adjust the tear off position (For
tractor paper state)
In Online mode, long press ENTER + TEAR OFF keys.
LF key: Advance
RLF key: Backwards
ENTER key: Confirm and save
HIGH IMPACT key: Give up the setting, just press this key to
exit and the printer will restart.
3.2 How to Use the Functional Setup
Function setup mode is only for this kind of printer. The setup modes enable various printer functions
to be set up with the function keys on the operation panel. This section provides the outline of the
setup modes and the details of the setup functions.
3.2.1 Menu setup functional key
1) Enter the Menu Setup Mode
Press Keys to enter the Menu Setup Mode.
ENTER
ALT
HIGH IMPACT
MENU
+