User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 55 -
A.1.4 Hex Dump Mode
Hex Dump mode can analyse if there is any malfunction in the interfaces of the printer and the
computer.
z Turn on the printer, firstly, press ALT+SPEED keys to initialize the printer, during the initialization,
press SPEED key to enter Hex Dump printing.
z Turn off the printer, press down SPEED key and turn on the printer.
The printer will printer out the data from the computer in Hex Dump mode.
Caution: Load the paper along the left side (the “0” mark on the ruler).
A.1.5 Pin test
Power off the printer, press down ENTER key and turn on the printer, then the printer will print out a
line for you to check whether there is pin broken.
A.2 Adjust Function
A.2.1 Alignment Adjust Mode
Enter the alignment adjust mode to improve the print quality when the printer is used for a long time.
Enter method: In ONLINE mode, long press “ENTER”.
LOAD/EJECT: Select to adjust the next DPI alignment.
SPEED: Each press this key, the odd line will move left with one step (Value decreased)
TEAR OFF: Each press this key, the odd line will move right with one step (Value increased)
ENTER: Save and print.
HIGH IMPACT: Press this key to exit the adjust mode, and then the printer will run the initialization.
Note: There are totally 7 adjustments modes (MODE 0~6).
Note: Alignment adjust mode will affect the printing quality, think over before adjust it and strict
to the instructions while adjusting.
***** HEXADECIMAL DUMP *****
(0000) 1B 40 A9 A6 29 29 A9 A6 2A 2A A9 A6 2B 2B A9 A6
(0010) 2C 2C A9 A6 2D 2D A9 A6 2E 2E A9 A6 2F 2F A9 A6
(0020) 30 30 A9 A6 31 31 A9 A6 32 32 A9 A6 33 33 A9 A6
(0030) 34 34 A9 A6 35 35 A9 A6 36 36 A9 A6 37 37 A9 A6
H PRINT MODE
Version: ACCEL-7450 VX.X XXX XXXX-XX-XX
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH