User's Manual

GSX-190II User's Manual
- 22 -
in the cut sheet position, otherwise, it should in the tractor paper mode.)
3. After loading paper, in cut sheet mode, the printer would print out the current setting and facility
operation guide of control panel automatically. In tractor mode, after installing the paper to the drive
tractor, once you press EJECT/LOAD key, the printer would load paper to printing home position and
then print out the current setting and the facility operation guide of control panel.
CITIZEN GSX-190II
Current Setting Report
SYSTEM SETUP
EMULATION EPSON IBM
LANGUAGE ENGLISH CHINESE
CHAR. MODE ASCII CHINA
CHARACTER
FONT ROMAN SANS SER
ENG PITCH 10 CPI
12 CPI 15 CPI 17.1 CPI PROPORTIONAL
CHI PITCH 6.7 CPI
7.5 CPI
INTL CHAR SET U. S. A.
FRANCE GERMANY U.K. DENMARK1 SWEDEN ITALY
SPAIN 1 JAPAN NORWAY DENMARK2 SPAIN 2 LATIN AM KOREA
LEGAL HOLAND TURKEY
CHARACTER SET ITALICS GRAPHICS
IBM CHAR TBL SET 1 SET 2
CODE PAGE U.S.A. MULTI PORTUGAL CANADA NORWAY ICELAND BRASCII
ABICOMP ROMAN 8 ISO LTN1 PC858 ISO LTN9 ARAB NLS WIN 1256
TURKEY WIN LAT1 CYRILLIC RUSSIAN THAI VIETNAM
PAGE LAYOUT
LINE SPACING 6 LPI 8 LPI
FORM LENGTH 3 INCH 3.5 INCH 11/3 INCH 4 INCH 5 INCH 5.5 INCH 6 INCH
7 INCH 8.5 INCH LETTER
A4 12 INCH
FORM LOCK OFF ON
PAGE SKIP OFF ON
COMPRESS PRINT NORMAL 75% 50%
PRINT SETUP
PRINT DIR BI-DIR UNI-DIR AUTO
PRT-SPEED NOR-SPEED HI-SPEED SUP-SPEED
AUTO LF OFF ON
TEAR OFF OFF ON
TEAR POS TEARER HEAD TOP
PIN SWITCH OFF ON
IMPACT MODE NORMAL COPY 1 COPY 2
SERIAL 1/F
BAUD RATE 19200 BPS 9600 BPS 4800 BPS 2400 BPS 1200 BPS
PARITY NONE ODD EVEN
DATA BIT 8 BIT 7 BIT
STOP BIT 1 BIT 2 BIT
PROTOCOL XON/XOFF DTR
Please press the ONLINE key, ensure the online light is on, then hold down the EJECT/LOAD key about
3 seconds to enter Menu Setup Mode.
Note: It’s suggest using the paper which is not smaller than 8*11inch (width*length).
Figure 3-13 Print out the current menu setting