User's Manual

GSX-190II User's Manual
- 24 -
3.2.2 Online-aptitude Parameter Settings
GSX-190II supports the function of online-aptitude parameter settings, which can be set in the PC with
the driver installed in.
The concrete setting steps are shown as follows:
1. Make sure that the host and the printer are connected with a cable and both the host and the printer
are turned on, the printer should be in normal working condition as well.
2. Click “Start” → “Settings” → “Printers”.
3. Right click “CITIZEN GSX-190II” in the “Printers”, select “Properties”.
4. Click “Printer Settings” in the property page.
5. The setting way is corresponding with that of printer menu system. In the “Printer Settings” layout,
select the first class menu in the combobox of “Select Printer Setting Class”, select the second menu
in the “Options” and set the item in the current parameters list.
6. Click the key “Reset All” to reset all the parameters to be the driver’s default, but not change the
printer’s settings.
7. When setting the parameters: you can click “Set Current” to save the current settings after setting
each item, or you can also click “Set All” after setting all parameters. After clicking “Set All” or “Set
Current”, the parameter’s instruction will be sent to the printer.
8. The printer’s parameter settings are changed at once after receiving the instruction and the printer
does not need to restart.
9. After finishing settings, click “OK”, exit the “Properties” window.