User's Manual

GSX-190II User's Manual
- 32 -
Appendix A Specifications
A.1 General
Item Description
Printing method 9 Pin Dot Matrix Impact Printer
Printing width 80 columns (10 CPI)/ 203.2 mm
Printing speed ASCII
Normal speed
(NLQ)
High speed
(DRAFT)
Super high speed
(SUPER-DRAFT)
10 CPI 56 CPS
225 CPS
300 CPS
12 CPI 67 CPS
270 CPS
337 CPS
Print head Diameter of wire: 0.3 mm
Resolution 240 x 144 dpi (Max.)
Character set
ASCII: 17 international character sets (U.S.A, FRANCE, GERMANY, U.K., DENMARK1,
SWEDEN, ITALY, SPAIN 1, JAPAN, NORWAY, DENMARK2, SPAIN 2, LATIN AM, KOREA,
LEGAL, HOLAND, TURKEY)
Code page
U.S.A, MULTI, PORTUGAL, CANADA, NORWAY, ICELAND, BRASCII, ABICOMP, ROMAN 8,
ISO LTN 1, PC858, ISO LTN9, ARAB NLS, WIN 1256, TURKEY, WIN LAT1, CYRILLIC,
RUSSIAN, THAI, VIETNAM
Fonts
ASCII: ROMAN, SANS SER
Note: In high speed mode or super high mode, printer would automatically change the
ASCII font to Draft when printing ASCII characters.
Character pitch ASCII: 10 CPI, 12 CPI, 15 CPI, proportional
Line spacing 1/6 inch, programmable in 1/432 inch increments
Paper feed Speed
Normal mode: 3 inches per second (Continuous feed)
63ms formfeed one line (1/6 inch)
Copy mode: 3 inches per second (Continuous feed)
63ms formfeed one line (1/6 inch)
Emulation EPSON ESC/PK2
Interface
Parallel interface: Centronics (IEEE1284 NIBBLE Mode)
USB interface: USB 2.0 Full-Speed
Serial interface: RS-232C
Note: According to specific interface standards
Input Buffer 132 KB
Ribbon
Model: JMR108
Life: 3 million characters (draft mode)
Noise ＜53 dB (A) (GB/T 18313 / ISO7779 standard)
Control panel The control panel consists of four keys and four indicator lights.
Paper feed type
Cut sheet Feed paper by friction
Tractor paper Feed paper by drive tractor
Paper thickness
adjustment
Set through gap adjust lever