User's Manual
Table Of Contents
- Important Safety Instructions
- Compliance Statements
- Warnings, Cautions and Notes
- The Guide
- Table of Contents
- Chapter 1 Preparation
- Chapter 2 Control Panel
- Chapter 3 How to Use the Printer
- Chapter 4 Problems and Solutions
- Chapter 5 Printer Maintenance and Technical Service
- Appendix A Specifications
- Appendix B Paper Specification
- Appendix C Command Summary
GSX-190II User's Manual
- 42 -
◆ Requirement of Multi-ply paper (NCR paper)
It is recommended to use the multi-ply paper which is first class or above. Low class NCR paper
would affect the copy effect and printer life.
Specification of NCR multi-ply paper is shown below:
Pages 2-ply 3-ply 4-ply
Page 1 40〜64 g/m
2
40〜50 g/m
2
40 g/m
2
Page 2 40〜80 g/m
2
40〜50 g/m
2
40 g/m
2
Page 3 ---- 40〜80 g/m
2
40 g/m
2
Page 4 ---- ---- 40〜80 g/m
2
◆ The protuberance of transverse perforation
When the fanfold transverse perforation sticks up, it may cause print quality decrease, unstable
paper feed or paper jam etc. Especially when the multi-ply paper with many pages, it will deeply
affect the stable of paper feed. Please ensure the protuberance height less than 1 mm.
6.35
Loading direction
Unit: mm
6.35
Fixed tightly
Not fixed tightly
25.4
Transverse perforation
Above 2
Paper binding space is
over 50.8mm
(
2inches
)
3 ~ 4
About 1
Press down to
avoid warping
If bind the four
places together
50.8 Space
The size and position of paper
binding (Double-ply)
Expanding figure of
the binding part
Transverse perforation
Transverse perforation
Less than1 mm
Less than 1 mm