User's Manual

GSX-190II User's Manual
- 43 -
◆ Warp between toothed holes of each ply
Please use the paper which toothed holes warp between each ply (causes by the warp of multi-ply
papers superposition) is less than 0.4 mm.
◆ Binding hole, Clipped corner
It is not support the paper which is with binding holes and clipped corners.
◆ Rumple, crease
The paper should not have creases or rumples, especially for new paper. The first and last pages are
easy to have creases or rumples, so please do not use them.
◆ The crease, crimp, fold and upturning of the paper top and bottom
Please do not use the paper which is crease, puckered, crimp and upturning in the top and bottom.
Or it may cause cheap printing quality or paper jam. Especially for the new paper, if it is crease from
the first few pages, please do not use it.
◆ Paper folding part
Please fold the paper base on the transverse perforation. It will affect paper feeding while the folding
part sticks up as the following figure shown, please not use it.
Toothed holes section
Warp is less than 0.4 mm
Toothed hole
Caution: Do not use the paper with clipped corner or binding hole which is not include in
the guarantee list. It can not guarantee device’s capability after using it.
Rumple
Crease