User's Manual
Table Of Contents
- INTRODUCTION
- SPECIFICATIONS
- INSTALLATION
- INSTALLATION DRAWINGS
- PARTS LIST
- APPENDIX A - INSTALLATION WORKSHEET
- APPENDIX B - OUTPUT PROTOCOLS
- APPENDIX C - BULGIN CONNECTOR ASSEMBLY
- APPENDIX D - TRANSPONDER ID SETTINGS
- APPENDIX E - TRANSPORTATION
RADius 1000 Installation Manual, rev. 5 Installation
9
3. INSTALLATION
3.1 General information
This chapter describes a typical ship installation of the RADius system (EX approved
transponders are described in separate manuals). The standard system is supplied with the
following parts:
• A 19-inch rack (6U) (resiliently mounted)
• RADius 1000 Processing Unit (mounted in the rack)
• RADius 1000 Interrogator Unit
• RADius 500 Transponder
• VDU monitor for desktop mounting
• Keyboard with integrated mouse (1U)
• A power and connection shelf (2U) (mounted in the rack)
• Power and data cables between the Processing Unit and the Interrogator Unit
• Documentation
• Power supply - Transponder
Figure 1 RADius 1000 system, single Interrogator