Digital Camera Instruction Manual Freedom Zoom 140, 160, Riva Zoom 140, 160

3332
1.With the focus-area indicator on the subject,
press and hold the shutter release button
partway down.
• The green focus lamp should glow to confirm the
focus is locked.
BASIC OPERATION
2.While pressing the shutter-release button
partway down, recompose the picture so
that the top of the subject falls below the
close-framing guide. Press the shutter-
release button all the way down to take the
picture.
Because of parallax, the image seen in the viewfinder
and the image recorded with the camera are not
exactly the same. Parallax becomes significant with
close subjects. A close-framing guide automatically
appears in the viewfinder when the image needs to be
recomposed to eliminate the effect of parallax. The
close-framing guide appears in Area AF, spot AF, and
target AF.
If the subject is too close, the green focus lamp blinks
rapidly and the shutter is locked. If the subject is
extremely close, the green focus lamp may blink
slowly and the shutter will release, but the focus will
not be sharp.
Close-framing guide
Actual image (shaded area)
FOR CLOSER SUBJECTS