Digital Camera Instruction Manual Freedom Zoom 140, 160, Riva Zoom 140, 160

YY MM DD hh mm
5958
IMPRINTING THE DATE OR TIME
FOR OWNERS OF THE QUARTZ-DATE MODEL
Press the date button to select the date
imprinting format.
• The display will change as follows:
•If the date/time display is blinking, the calendar and clock need to be reset (p.
59). No information will be imprinted until the date and time are entered.
SETTING THE DATE OR TIME
Continued on next page.
Note: the date and time must be reset each time the battery is replaced.
1.Turn the camera on. Press the date button
until “SEt” appears on the data panel.
2.Press the select (SEL) button until the item
to be adjusted blinks.
• Each time the select button is pressed, the next item
on the calendar and clock blinks. The sequence is:
The display
stops blinking
ADVANCED OPERATION
Date imprinting Day/Time imprinting No imprinting Set mode