Digital Camera Instruction Manual Freedom Zoom 140, 160, Riva Zoom 140, 160

6564
TAKING PICTURES USING THE REMOTE CONTROL
1.Place the camera on a tripod. Point the
camera so that the subject is within in the
focus frames.
FOR OWNERS OF THE QUARTZ-DATE MODEL
3.Point the remote control toward the
front of the camera and press either
the release button (•) or the delay
button (2s) to take the picture.
• If the release button (•) is pressed, the self-
timer/remote-control lamp on the front of the
camera will blink once before the picture is
taken. If the delay button (2s) is pressed, the
lamp will blink for two seconds before the
picture is taken.
Continued on next page.
ADVANCED OPERATION
2.Press the drive-mode button until the
remote-control indicator appears on the
data panel