Digital Camera Instruction Manual Freedom Zoom 140, 160, Riva Zoom 140, 160

6968
3. Recompose the picture.
• The focus frames or focus-area indicator will
disappear after releasing the shutter button. The
focus lamp will remain lit indicating the focus is
locked.
FOR OWNERS OF THE QUARTZ-DATE MODEL
4.Point the remote control toward the front of the camera, press
either the release button (•) or delay button (2s).
• The focus lock will remain in effect after the picture is taken allowing multiple
remote-control pictures to be made. The green focus lamp will glow to indicate
focus lock.
• To cancel focus lock, press the shutter-release button partway down or press
the zoom lever.
CHANGING THE REMOTE-CONTROL BATTERY
The remote control uses a 3V lithium battery (CR2032).
When pressing the remote-control buttons does not
release the shutter, the battery needs to be replaced. The
supplied battery should be sufficient for approximately ten
years of operation.
1.Pull out the battery chamber as shown and
remove the old battery.
2.Insert a new battery into the battery chamber
with the positive (+) pole up.
3.Slide the battery chamber into the remote
control.
ADVANCED OPERATION