User Manual

EXPOSURE – Bracketing

EXPOSURE – Setting the ISO Manually

1. Turn the function dial to ISO.

2. Press the function button and

turn the control dial until the

desired ISO value appears in

the data panel.

Set the film speed manually when you want to override the DX-coded

film speed or when using non-DX-coded film. Film speeds can be set

from ISO 6 to 6400 in 1/3EV increments.

Film must be loaded before the ISO can be changed.

While pressing the exposure-

compensation button, press the

shutter release button all the

way down and hold.

• The camera automatically exposes a three

frame bracketed series.

• Releasing either button before the series is

complete cancels the exposure series.

This function automatically exposes a 3 frame 1/2 stop increment

bracketed series. The order of the exposures will be the metered

exposure, 1/2-stop under the metered exposure, 1/2 stop over the

metered exposure.

• The automatic bracketing feature cannot bracket flash exposures.

This effect is most visible when slide film is being used.

Metered Exposure 1/2 Stop Under 1/2 Stop Over