User Manual

6766
FOR OWNERS OF THE QUARTZ DATE MODEL
1. Press the mode button to choose
the data imprinting format.
• The display changes as follows:
2. Take the picture.
• If the print indicator blinks after the shutter is
released, the data was exposed.
The Quartz-data function lets you record the date or time onto the
lower-right corner of the photograph. The quartz data back has an
automatic calendar through the year 2019.
• Imprinted data may be difficult to read if the lower-right corner of the
photograph is bright or non-uniform.
• Imprinting size and position may differ according to printing conditions.
• Do not use the data back when temperatures exceed the operating range of
0 to 50 °C (32 to 122 °F).
Exposing the Date/Time
Before taking the picture…
Mode button
Select button
Adjust button
Print indicator
FLASH – Wireless/Remote Flash
1. Attach the accessory flash to
the camera, then turn the
flash on.
2. Turn the function dial to WL.
3. Press the function button and
turn the control dial until WL
and OFF appear in the
camera’s data panel.
4. Detach the accessory flash.
Cancelling Wireless/Remote Flash Mode