User Manual

FUNCTION P-MODE SETTING

• Date, red-eye reduction, ISO settings will not change.

• Pressing the program-reset button will also reset an attached

dedicated accessory flash’s program settings. Refer to the flash

instruction manual for details.

• Spot/AE lock button function, AF illuminator function will not change.

Press the program-reset button to return the following camera

functions to their program settings.

Exposure mode P mode

Focus mode Autofocus

Flash mode Auto-on

Exposure Compensation +/– 0

Film-drive mode Single-frame advance

Self-timer Cancelled

Wireless/Remote Flash Cancelled

Bracketing Cancelled

Multiple Exposure Cancelled

APPENDIX

Program Reset Button

CHANGING CAMERA FUNCTIONS

AF IIluminator On

When the built-in flash is up, its AF illuminator fires

when necessary to assist focus.

• The AF illuminator does not fire when flash cancel ( ) is

selected.

AF Illuminator (Built-in Flash) Function

AF Illuminator Cancelled

The built-in flash’s AF illuminator will not fire.

• An attached accessory flash’s AF illuminator will not be

cancelled.

• Other flash functions will operate normally.

Press to activate, release to cancel.

Spot/AE Lock Button Operation

Press once to activate, press again to cancel.

Slide the Main switch to LOCK, then to ON

while pressing the Flash-mode button.

• The status of the AF illuminator is displayed in

the data panel.

Slide the Main switch to LOCK, then to ON

while pressing the Program-reset button

and Spot/AE lock button.

• Repeat the above procedure to return to the

previous setting.