User Manual

7574
MODE DISPLAY CAUSE ACTION
P
A
S
M
Light level is
beyond the
range of
available
shutter
speeds and
apertures.
Bright Light: use
slower speed
film, a neutral
density (ND)
filter, or reduce
the light level of
your
surroundings.
Low Light: use
higher speed
film or a flash.
P
Scene or
subject
brightness is
beyond the
camera’s
metering
range.
A
The required
shutter
speed is
beyond the
range of the
camera.
Select a larger
or smaller
aperture until the
display stops
blinking.
S
The required
aperture is
beyond the
range of the
lens.
Select a faster
or slower shutter
speed until the
display stops
blinking.
EXPOSURE WARNINGS
Indicators will blink in the viewfinder or data panel when there is a
problem with the exposure.
ACCESSORY INFORMATION
Fit the lens hood into the mount
at the end of the lens barrel,
then turn the hood clockwise
until it stops.
• To store the hood, reverse it, attach it to
the lens, then replace the lens cap.
Flare is non-image forming light that degrades image quality. A lens
hood improves image quality by reducing flare.
• Remove a lens hood before using the camera’s built-in flash.
Lens Hood
For owners of the optional lens kits