- Konica Digital Fax/Copier/Printer Operating Instructions

Memory transmission
Default setting: On
Note: When the machine’s memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
Note: When you use the platen glass, the machine always uses memory transmis-
sion even if you set the memory transmission to off.
To change the default setting of memory transmission:
1
Press Program key, B ,2,0,6, ENTER .
2
Press or until the mode you want appears.
In this example, we’ve chosen Off.
3
Press ENTER to save the setting.
Quick Memory transmission
Default setting: On
Important: Your fax machine’s memory transmission feature must be turned on
to use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1
Press Program key, B ,2,0,7, ENTER . The LCD shows:
2
Press or until the mode you want appears.
Here, we’ve chosen Off.
3
Press ENTER to save the setting.
TTI transmission
Default setting: On
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier ( TTI ), and a fax number. You can set the machine to not send the TTI .
1
Press Program key, B
,2,0,8, ENTER . The
LCD shows:
2
Press or until the setting you want appears. In this example, we’ve
chosen Off.
3
Press ENTER to save the setting.
TTI Tx :Off

/

/Enter
TTI Tx :On

/

/Enter
Quick Tx :Off

/

/Enter
Quick Tx :On

/

/Enter
Memory Tx :Off

/

/Enter
Memory Tx :On

/

/Enter
Changing the default settings
4.2