- Konica Digital Fax/Copier/Printer Operating Instructions

Changing the default settings
Setting Sleep mode (Energy saving mode)
Default setting: On
Your machine is initially set to be in the Sleep mode automatically when 5 minutes
has passed after you pressed any key last.
If you want to set the Sleep mode to Off, you can set it here.
Note: If you want to change the time, see page 1.19.
1
Press Program key, B
,1,0,5, ENTER
.
2
Press or until the mode you want appears.
3
Press ENTER to save the setting.
Helpful Tip: By pressing ENERGY SAVING , you can switch the machine to Sleep
mode immediately, regardless of the on/off setting or time setting on
page 1.19. To use the ENERGY SAVING key, you should assign it to a
Soft key in advance. (See page 3.16.)
Note: All LED lamps on the control panel will not be off, even when the machine is
in the sleep mode.
Primary mode
Default setting: None
You can set the primary standby mode in this operation. After finishing any jobs,
your machine will return to the mode you set here immediately.
1
Press Program key,
B ,1,0,7, ENTER
.
2
Press or until the mode you want appears.
3
Press ENTER to save the setting.
Setting the paper source
Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
You can choose one of following for each paper source:
“Fax”: Select this if you want to use the paper source you selected for fax-
ing and list (or report) printing.
“Copy”: Select this if you want to use the paper source you selected for copy-
ing only.
“Fax/Copy”: Select this if you want to use the paper source you selected for fax-
ing, list (or report) printing and copying.
“Not Used”: Select this if you want to use the paper source you selected for PC
printing.
Note: PC printing is available only when your machine has the
optional printer controller kit.
1
Press Program key, B
,1,0,9, ENTER
. The LCD
shows:
2
Press or until the mode you want appears.
3
Press ENTER to save the setting. The LCD shows:
4
Press or until the mode you want appears.
5
Press ENTER to save the setting.
Setting 2-bin tray (Option)
Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray,
PC-Fax exit: Upper tray
You will set where to exit the printed paper in this operation.
Note: This operation will appear only when your machine has the optional 2-bin
tray unit.
1
Press Program key, B ,1,1,0, ENTER .
2-Bin Tray :Off

/

/Enter
Bypass Tray:Fax/Copy

/

/Enter
Cassette1 :Fax/Copy

/

/Enter
Primary Mode :None

/

/Enter
Sleep Mode :On

/

/Enter
4.9