Printer Operating Instructions

1.6

Getting started

Installing the printing supplies

Your fax prints incoming faxes and copies with a reliable 600 dpi print engine. Your

fax requires two types of printing supplies (sometimes also called consumables):

• The drum cartridge — It yields 20,000 “normal” A4-sized printouts (see

“Specifications,” page

.2). By “normal,” we’re referring to the amount of text

and/or graphics on each page. This is based on an industry-standard test docu-

ment.

• The toner cartridge — It yields 16,000 “normal”, A4-sized printouts (see

“Specifications,” page

.2).

Note: The toner cartridge included with your machine is starter toner cartridge,

which yields 3,000 printouts. Please purchase regular, full-yield toner car-

tridge from your authorized Konica dealer.

To install these supplies:

Important: Gently close the top cover so that you don’t catch your hands, possibly

injuring them.

Pull up the top cover

release and open the top

cover.

Slide the printer cover

release and open the

printer cover.

Unpack a new toner cartridge from its

carton. Then, holding the toner car-

tridge with both hands, slowly shake it

to distribute the toner evenly inside the

cartridge.

Note: Do not touch the roller of the

toner cartridge.

Gently install the toner cartridge in

the printer, making sure the toner car-

tridge’s two pins fit in the slits inside

the printer frame.

Unpack the drum cartridge from its carton.

Note: Shield the drum cartridge from light, especially strong light. Later, if

you have to remove the cartridge from the machine, immediately

wrap it in a thick cloth to protect it from light.

Gently install the drum cartridge in

the printer, making sure the drum

cartridge’s four pins fit in the slits

inside the printer frame.