Printer Operating Instructions

ManualsBrandsKonica Minolta ManualsAll in One Printer7013

2.4

Basic operation

Sending a fax using the ADF

Press

COPY

FAX

to change to Fax mode.

Insert the document face up, top edge first. And adjust the document

guides — by sliding either of them to the left or right — to fit the page(s)

you’ll be faxing. Your fax machine’s

ADF

(Automatic Document Feeder) will

hold up to 50 pages with A4-sized paper.

When a document is in the feeder, the

LCD

shows the scanning width and the

amount of memory available:

Adjust resolution and contrast if necessary.

Enter the fax number.

Also, enter any access codes necessary, just as you would for a regular phone

call. (Example: Enter 9 to “dial out” from an office telephone system, or 1 for

long-distance.)

Press

START

By pressing

START

, you’ve just given your machine a command. In turn, your

machine gives this action a command number as it scans the fax document.

This command number appears on the first line of the

LCD

for a few seconds:

You’ll need to know this command number if you later wish to cancel the

transmission or to print a stored document (see pages 2.7–2.8).

Now, everything is up to the machines — yours and the one you’re dialing.

• If the fax has been set for Quick Memory transmit, your machine scans the

first page of your document into memory, then dials the other fax. When it

makes contact, your machine transmits the stored document from memory

while at the same time scanning the remaining pages of your document

into memory. (In default setting, the Quick Memory transmission is On.If

you want to turn off this feature, see page 4.2.)

• If the fax has been set for the normal memory transmit, your fax scans the

entire document into memory, then dials the other fax. When it makes con-

tact, your machine transmits the entire stored document from memory.

• If the fax is set for Real time transmit (non-memory transmission), your

machine simply dials the other fax. When it makes contact, your machine

feeds the document through, scanning and transmitting it as it goes.

Note: The more “stuff” (called black coverage) your machine “sees” on a

page, the more slowly the page feeds through as the fax scans it. And

even if the page is relatively clean, sending it in grayscale mode or at

certain resolutions makes your machine “see” more “stuff.”

The same is true if you set the contrast to Dark.

Important: If you want to cancel a transmission while scanning the docu-

ment, press the

STOP

key.

If you want to cancel a transmission in progress, use the Review

Commands function. See “Reviewing or canceling commands,”

page 2.7.

At the end of the operation, your fax machine beeps and displays:

Important: Whenever you transmit a document, what actually appears on

the top line of the display depends on information stored in the

remote fax. The line may even be blank.

Note: If the call fails, see “Redialing,” page 2.6.

919725552009

** Complete **

== Command:01 ==

Press Start

919725552009_

Document Ready

A4 Mem100%