- Konica Digital Fax/Copier/Printer Operating Instructions

2.8
Basic operation
3
If you want to cancel the command shown, press CANCEL . The LCD shows:
4
To go ahead with canceling the command, press CANCEL again. Go back to
step 2 to view other delayed commands.
To keep this command but to continue reviewing stored commands, press
or . Go back to step 2.
To keep this command and stop reviewing commands, press STOP to return
your machine to standby mode.
Note: See also “Reviewing or canceling parts of a broadcast,” below.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press COMM . CANCEL / CONFIRM .
2
Press or to scroll through currently stored broadcast command.
Note: Stop this operation at any time by pressing STOP .
3
If you want to cancel the command shown, press CANCEL , CANCEL .
If you want to review individual numbers within this broadcast, go on to
step 4 without pressing CANCEL .
4
To review individual numbers within this broadcast, press (or BROADCAST )
to see the first number. The LCD shows:
5
Press or until you find the number you want to cancel.
6
Press CANCEL , CANCEL . The next number will appear.
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press .
If you don’t want to cancel any more numbers, press STOP . The machine
returns to standby mode.
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or “remote location”
• The start time (this appears in a DD , HH :
MM
format)
• A “note” telling if the command is a polling or F-Code operation (see pages
3.14–3.15 for more on polling and 3.25–3.34 for more on F-Code communication).
To print a delayed command list, press Program key, E
,1,0,5 ENTER .
Printing a stored document
Your fax machine can print out each document stored for delayed transmission.
To print a stored document, you’ll need to know the document’s command number,
which you can get by either reviewing the commands or printing a delayed com-
mand list (see above).
1
Press Program key, D ,3,0,5 ENTER . The LCD shows:
2
Use the numeric keypad to enter the command’s identification number, 1–99.
For example, we could enter the following for the very first command, 1:
3
Press ENTER . Your fax machine will print a copy of the stored document.
Com. Stored Doc.
Command No. :1_
Com. Stored Doc.
Command No. :_
9-5550388

/

/

/Cancel
C01:Broadcast

/

/

/Cancel
C01:9-5552311
Check

/

/

/Cancel